Jacuzzi J-SHA manual Repairs to the Surface, Lamp, Light Bulb Replacement

Repairs to the Surface

Minor scratches which do not penetrate the color finish (acrylic) can be removed with 600-grit wet/dry sandpaper. Restore the glossy finish with an acrylic polish or a comparable automotive paste wax. Major scratches or gouges which penetrate the acrylic surface require refinishing. Ask your dealer for special instructions.

Lamp

When the bulb burns out, replace it from the back of the lamp fitting, on the underside of the shell, by pulling out the bulb receptacle. Replacement bulbs (7W, 12V) are available from your Jacuzzi Whirlpool Bath dealer.

LIGHT BULB REPLACEMENT

LOCKING NUT

LIGHT BULB

BULB

RECEPTACLE

LIGHT BEZEL

SHELL

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.

Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of this product. Jacuzzi Whirlpool Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.

Jacuzzi Whirlpool Bath National Headquarters

P.O. Drawer J, Walnut Creek, CA 94596 (925) 938-7070

Service Support: Call (800) 288-4002

©1999 Jacuzzi Whirlpool Bath P946000 5/5/03

Printed on Recycled Paper Printed in the U.S.A.

13