Jacuzzi K272000AF 7/06 manual Skirts, Installation Instructions, Corner Baths with Skirt, English

INSTALLATION INSTRUCTIONS

Skirts

INTEGRAL SKIRT MOUNTING DETAIL

FINISHING

MATERIALS

CAULKING BEAD

SKIRT

PANEL

Corner Baths with Skirt

If an optional skirt is used on a corner bath, additional support is necessary in the front of the unit. Measure the height from the floor to the underside of the bath rim. Cut two 2" x 4" studs, apply adhe- sive to both ends and install (See specifications in ROUGHING-IN REFERENCE (CORNER)).

SUPPORT FOR CORNER BATHS

APPLY	H
ADHESIVE
	2" x 4" STUD
	(50,8 mm x 101,6 mm)

ENGLISH

U FRAME SKIRT MOUNTING DETAIL

FINISHING MATERIALS

SECURE SHELL CLIP

UNDER CENTER

BATH RIM

FILLER (Optional)

CAULKING

BEAD

SKIRT

PANEL

SKIRT

FRAME

SECURE BOTTOM OF FRAME TO FLOOR

Removable Skirt Panel

Removal and Installation

To remove panel, grab a top corner of access panel and pull outward to release the first Dual Lock fastener. Then work around the perimeter pulling access panel outward to release the remaining dual Lock fasteners.

To reinstall, align access panel such that the Dual Lock fasteners on the access panel match to the Dual Lock fasteners on the tub skirt. Engage each Dual Lock pair until all are snapped into place.

PEEL BACK CORNER

TO BEGIN DISCONNECTING

DUAL LOCK™ FASTENER

19

Jacuzzi Whirlpool Bath K272000AF 7/06