James Loudspeakers EMB owner manual Operated

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

!

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts are inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point with arrowhead symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature 'accompanying the subwoofer.

1. Read Instructions - All safely and operating instructions should be read carefully before the subwoofer is

operated.

2. Retain Instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the subwoofer and in the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Water and Moisture - The subwoofer should not be used near water - for example, near a bathtub, washbowl, sink, laundry tub, in a wet or damp basement, near a swimming pool, or the like.

6. Carts and Stands - The subwoofer should be used only with a car t or stand recommended by the manufacturer.

7. Wall or Ceiling Mounting - The subwoofer should be mounted to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The subwoofer should be situated so that its location or position does not interfere with its proper ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9. Heat -The subwoofer should be situated away from heat sources such as heating radiators, heat registers, stoves, or other subwoofers or components that produce heat.

10. Power Source - The subwoofer should be connected to a power supply only of the type described in the operating instructions or as marked on the subwoofer itself.

11. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the subwoofer.

12. Caution - To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.

13. Cleaning - The subwoofer should be cleaned only as recommended by the manufacturer.

14. Non-use Periods - The power cord of the subwoofer should be unplugged from the outlet when it is left unused for extended periods of time.

15. Object and Liquid Entry - Care should be taken that objects will not fall and liquids will not be spilled on the

enclosure.

16. Damage Requiring Service - The subwoofer should be serviced by qualified personnel when: a. the power supply cord or plug has been damaged.

b. objects have fallen or liquid spilled into the subwoofer. c. the subwoofer has been exposed to rain.

d. the subwoofer does not appear to operate normally or exhibits a marked change in performance. e. the subwoofer has been dropped or damaged.

17. Servicing - The user should not try to service the subwoofer beyond what is described in the operating

instructions.

18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrical shock.

19. Replacement Parts - When replacement par ts are required, be sure the service technician has used replacement par ts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. All other servicing should be referred to Qualified service personnel.

3