11
zLower the presser foot. Press the Up/Down needle
button twice to raise the needle to its highest
position. Turn the power switch off.
Push down the needle threader knob q as far as it
will go.
Built-in Needle Threader
*Model 1600P only
z
r
w
e
q
x
c
v
b
xTurn the knob q in the direction of the arrow to
insert the hook into the needle eye.
The hook r comes out through the needle eye
as illustrated.
cHolding the thread with both hands, draw the
thread along the thread path w.
Then hook the thread around the guide e.
vDraw the thread under the hook r.
Hold the end of thread with your hand while pulling
up the thread lightly in the direction of arrow.
bTurn the knob in the direction of the arrow as
shown, drawing the thread loop t through the
needle.
Release the threader knob slowly. Then pull the
thread loop t to the right.
t
The needle threader may not work
well with these combinations.
#9 #20, #30, #50, #60
Needle
#11 #20, #30
#14 #16, #20, #30