7
To Remove Bobbin Case and Bobbin
qHook cover plate
wHook cover
eLatch
rBobbin case
tBobbin
zRaise the needle and presser foot.
Remove the hook cover plate q and open the
hook cover w.
xPull open the latch e of the bobbin case r. Take
the bobbin case straight out of the hook.
• To remove the bobbin from the bobbin case:
Release the latch, then drop the bobbin t out of
the bobbin case as illustrated.
* Only use this exclusive bobbin for model 1600P.
CAUTION
Turn the power switch off and unplug the sewing
machine from the electrical outlet
t
Setting the Spool of Thread
qSpool of thread
wSpool pin
eSpool cap
• Setting a spool of thread:
Place a spool of thread q on the spool pin w
with the thread coming off the spool as shown.
Attach the spool cap e, and press it firmly against
the spool of thread.
rSpool holder
tNet
• Setting the thread cone:
Place the spool holder r on the spool pin, then
place the thread cone on the spool holder.
Cover the thread cone with the net t if the spool
thread is shaky when sewing.
e
q
w
r
t
q
w
z
r
r
xe