Janome 1600P Series

Replacing the Light Bulb

CAUTION:

Tur n the power off before replacing the light bulb.

The bulb could be HOT, wait until it has cooled down before

touching it.

qSetscrew

wFace cover

eLamp socket

rLight bulb

To remove:

Remove the setscrew q.

Remove the face cover w.

Pull out the bulb r from the lamp socket e.

To replace:

Insert a new bulb into the opening of the socket e.

Attach the face cover w with the setscrew and cap.

Replace the bulb with the same type, rated 12 V, 5 W.

Lay the machine on its back.

Replacing the Light Bulb on the Underside of the Sewing Arm

Detach the lamp window q from the machine with the

screw driver as shown.

Pull out the light bulb e from the socket.

Insert a new bulb into the socket w.

Attach the lamp window q into the opening on the

machine.

qLamp window

wLamp socket

eLight bulb

Replace the bulb with the same type, rated 12 V, 5 W.

Contents

Main WARNING SAVE THESE INSTRUCTIONS DANGER IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS Name of Parts KNOW YOUR MACHINE To Attach Knee Lifter The knee lifter is extremely helpful when sewing e w Standard Accessories GETTING READY TO SEW Up/Down Needle Position Button Bobbin Winding Button Thread Cutter Button Stitch Length Adjustment Dial Reverse Stitch Lever Presser Foot Lifter Foot Pressure Dial Attaching and Detaching Presser Foot To Remove Bobbin Case and Bobbin x Setting the Spool of Thread Page Page Threading the Needle Thread v c b x Page Page Thread and Needle Chart Changing the Needle for Model 1600P To Check the Needle Thread and Needle Chart Changing the Needle for Model 1600P-DB and 1600P-DBX Needle To Check the Needle w Balancing Needle Thread Tension Adjusting Needle Thread Tension Adjusting Bobbin Thread Tension HOW TO SEW Securing a Seam By knotting the threads By reverse stitching Turning a Square Corner Using the Cloth Guide Rolled Hem CARE & MAINTENANCE Cleaning the Hook and Feed Dog Oiling the Machine Page 21 Troubleshooting Cause Reference Condition