Single Push Button Kit: If you purchased a kit with a single push button, the chime tune will be set to Ding Dong from the factory.
Dual Push Button Kit: If you purchased a kit with two push buttons, one push button will be set to Ding Dong and the other push button will be set to Westminster from the factory.
The following instructions explain how to change the tune on any wireless push button.
1.Remove the battery from the push button transmitter.
2.Locate the 9 position jumper shown below.
9 position jumper (This pushbutton is set for Ding Dong Chime since 7=off, 8=on, and 9=off.)
3. Select the desired chime sound from the table below.
Chime Sound Table |
|
| |
Position | 7 | 8 | 9 |
Westminster | ON | OFF | OFF |
Ding Dong | OFF | ON | OFF |
Knock | OFF | OFF | ON |
Bronze Chime | ON | ON | OFF |
Cuckoo Clock | ON | OFF | ON |
Foghorn | OFF | ON | ON |
Gong | ON | ON | ON |
ON: Add a jumper to a location
OFF: Remove jumper from a location.
4.Remove or add the jumpers to match the table.
5.Store unused jumpers as shown in the picture.
