Troubleshooting
Chime doesn't work:
1.Make sure push button switch is depressed and held for at least 1 second.
2.Make sure plastic tag is removed from battery.
3.Make sure house code switches
4.Verify battery orientation in push button.
5.Try fresh batteries.
6.Make sure chime is not farther than 150 feet away from push button.
7.Ensure push button is not mounted on metal, near metal studs, or near the floor.
8.Try a new location for the chime.
Functional range may be adversely affected by one or more of the following factors: weather, radio frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
1.This device may not cause harmful interference, and
2.This device must accept interference received, including any interference that may cause undesired operation.
For technical support contact Jasco Products Company at
Made in China
is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 311 N.W. 122nd Street, Oklahoma City, OK 73114. www.jascoproducts.com
Rev. | 19208 |
