Jasco Pairing the GE 99004 to a Bluetooth, Enabled Device, Receiving Mode, Transmitting Mode

Pairing the GE 99004 to a Bluetooth®

Enabled Device

Receiving Mode:

1.Make sure the transmitting device (a laptop computer or other audio device transmitting via Bluetooth®) is turned on and in transmission mode. See the owner’s manual of the other device for any product specifi c instructions.

2.Turn on the Audio/Video receiver and select the appropriate input.

3.Set the GE 99004’s Receive/Transmit switch to Receive and turn it ON. When powered on, the 99004 will search for a Bluetooth® transmitter and if it has already been paired with the transmitter, automatically connect. If the devices have not been paired previously, press the front panel “pairing” button (with Bluetooth® logo) to pair the devices and link them. The GE 99004’s Pairing LED will fl ash quickly during this process and stay ON when pairing is complete. When unlinked, the LED will blink slowly. Note: When in “Receive” mode, the LED is red.

4.Play music from the source–computer, or stand-alone transmitter. The audio should stream to the receiver so that you can hear it through your stereo system.

Transmitting Mode:

1.Make sure the receiving device is turned on. Most Bluetooth® enabled headphones will automatically pair with the GE 99004. See the owner’s manual of the other device for any product specifi c instructions.

2.Turn on the Audio/Video receiver and select the appropriate input (CD, FM, etc.) for the music source.

4