3.Set the GE 99004’s Receive/Transmit switch to Transmit and turn it ON. When powered on, the 99004 will search for a Bluetooth® receiver and if it has already been paired with the receiving device, automatically connect. If the devices have not been paired previously, press the front panel “pairing” button (with Bluetooth® logo) to pair the devices and link them. The GE 99004’s Pairing LED will
fl ash quickly during this process and stay ON when pairing is complete. When unlinked, the LED will blink slowly. Note: When in “Transmit” mode, the LED is blue.
4.Play music from the source device. The audio should stream to the receiver so that you can hear it through your headphones.
Note: It may take up to 2 minutes for the GE 99004 and your Bluetooth® audio device to pair. While the GE 99004 and your audio transmitter is pairing you will see the Blue LED on the GE 99004 fl ashing quickly. Once your GE 99004 is paired you will see a slow and steady blinking.
Advanced Audio Controls |
|
If your audio device supports it, you can use the IR remote |
|
control or front panel pushbuttons to control (volume, play, |
|
pause, previous track, next track) your audio device. This |
|
only works if your other |
|
offer this feature. |
|
Turning Off the Unit |
|
If you don’t want to use the transceiver, turn it OFF with the |
|
slide switch. It can easily be paired back up to your devices |
|
the next time you choose to use it. While turning the unit |
|
“ON” or “OFF”, you’ll hear a |
|
power setting has cycled. | 5 |
|
