CONNECTING YOUR MOUSE
1.Disconnect the existing mouse.
2.Connect the receiver’s USB plug to the USB Port on your computer.
3.Place the receiver 8” (20cm) from any other electronic device such as your computer and monitor.
4.Install the included 2 AA batteries into the battery compartment located on the bottom of your mouse. Position the batteries according to the diagram in the battery compartment.
Low Battery LED
Link Button
On / Off Switch
2 AA Batteries
5.Turn on your computer and start your Operating System.
6.Place your Wireless Optical Mouse within 3 feet (approximately 1 meter) of the receiver for optimal communication.
7.Move the mouse to ensure there is a good connection.
8.If the mouse does not work, you may need to link your mouse. See the Trouble Shooting section for instructions.
4