![](/images/new-backgrounds/1224286/2242867x1.webp)
DVD Functions
This remote controls many DVD functions. The descriptions may vary from your original remote descriptions.
REW and FF buttons control the speed of Fast Forward and Reverse Playback respectively. CHAN+/CHAN- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc.
INFO button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remain- ing/elapsed indication, system information, etc. MENU brings up the DVD disc Menu screen - use with the UP, DOWN, LEFT & RIGHT navigation buttons.
OK button is used for
EXIT Exit
PLAY button is used to start Disc playback and for Menu selection on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY to resume.
INPUT brings up the DVD Players Setup Menu. Note, not all DVD Players support all the functions described above.
SAT Functions
CHAN+ and CHAN- buttons perform the “Page+” and
INFO button brings up Satellite Display screen for current Channel and system information.
MENU brings up the Satellite Menu screen - use with the UP, DOWN, LEFT & RIGHT navigation buttons.
GUIDE Displays
OK button is used for
INPUT button performs the Satellite TV/SAT func- tion.
6
Direct Code Entry
1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired mode
button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code
tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4.With your device on, press ON/OFF. If the
device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.
Write your codes down here for easy reference later.
Device | Device stored | Code |
|
|
|
TV | TV |
|
VCR |
|
|
CBL |
|
|
DVD |
|
|
SAT |
|
|
AUX |
|
|
7