Jasco RM24922 instruction manual Setting any Mode to use its own Volume/Mute Control

Using Your Remote, cont.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing.

1. Press and hold the SETUP button until the red indicator turns on, then release the button.

2.Press and hold the MUTE button until the red indicator blinks off, then release the button.

3.Press and release the desired Mode

button (TV, VCR, etc.), the red indicator blinks then stays on.

4. Press and release the VOLUME- (Down) button, the red indicator blinks then stays on.

5. Press and release the MUTE button and the red indicator turns off.

Your chosen Mode will now use its own Volume/ Mute control.

Using Your Remote, cont.

Sleep Function

The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature.

1. Press and release the TV device button.

2.Press and hold the Sleep button until the LED remains lit (about 2-3 seconds).

3.Release the Sleep button.

4. Press and release the numeric buttons (01-99) for the time required. The LED will blink off to indicate button press acceptance.

5.TV Sleep Timer is set.

6.Leave the Remote pointing towards the TV with an unobstructed path.

To cancel the Sleep Timer, press and hold the Sleep button until the LED blinks, or press and release the Power button in TV mode.

12 13