Jasco RM94940, RM24940 instruction manual Learning Function

CODE

SEARCH

2 inches

Learning Function

The learning feature is used as a supplement to the stan­ dard preprogrammed library. the standar code library provides most of the functions needed,, but you can add additional functions from your original remote. Note: No functions may be stored under the LEARN, SLEEP, CODESEARCH, MENU or any of the device buttons.

1.Place the remote control unit and the Original remote control unit so that they

face each other. They should not be any more than 2 inches apart.

2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.

3.Press and release the desired Mode button (TV, VCR, CABLE, SAT, etc. . . .) The INDICATOR LIGHT will blink off once button press is accept­ ed.

4.Press and release the LEARN button.

INDICATOR

LIGHT

VCRTV

(BLINK)

CDCBL/SAT

	SAT	DVD
5. Press and release the valid
button to be learned on the
94940 remote in which you will
store a new function. The L1, L2,		LEARN
L3 or any other button (except,
LEARN, CODE SEARCH, MENU,
OR device buttons) can be used to
store learned functions.

6.Press and hold the button on the original remote control until INDI­ CATOR LIGHT on the 94940 remote blinks once. Once the INDICATOR LIGHT blinks you may continue with the next func­ tion.

If there is error in learning the new function the INDICATOR LIGHT will flash for 3 seconds but remain in the learning mode. Return to step 5 if the INDICA- TOR LIGHT flashed.

L1 L2 L3 or other button

BLINK

CODE

SEARCH

NOTE: Hold the function key on your original remote for at least 3

seconds for the command to be successfully learned.

7.Repeat steps 5 and 6 to store more functions.

8.Once the selected functions are stored press the CODE SEARCH button and the remote will return to original operation mode.

4