Jasco RM84930 Using Your Remote, Controlling Devices with Separate Power On and Off Buttons

Using Your Remote, cont.

Controlling Devices with Separate Power On and Off Buttons

Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the ON•OFF button to turn the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/ DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.

VCR/DVD Punch-Through

This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, or DVD programmed Mode you used. This feature will not operate if the programmed TV, SAT or Cable code has its own VCR transport button control e.g. a TV Combo, SAT/PVR, etc.

Backlight Button

Backlighting is activated when you press the Backlight button. Backlight illumination occurs for five seconds after the Backlight button has been pressed. Any further key-presses within five seconds will continue to reset the five second time- out period. I.E., illumination always remains on for five seconds after the last keypress. Once timed out, the Backlighting will not reactivate until the Backlight button is pressed again.

10