Jasco ZWAVEKIT manual IMPORTANT NOTE ABOUT 3-WAYCIRCUITS CONT, Installation

IMPORTANT NOTE ABOUT 3-WAY CIRCUITS CONT.

The yellow wire from the 45607 must only be connected to the yellow wire of the 45610 via the traveler wire. The dimmer switch will fail if the yellow wire is connected to Line (Hot), Neutral or Ground. It must be insulated properly if it is not used.

Please consult an electrician if you have trouble identifying the type of wiring circuit you wish to convert or if you do not feel confident in your ability to convert the circuit to Z-Wave control.

INSTALLATION

This dimmer switch is designed for use with permanently installed incandescent lighting only and may be used in new installations or to replace an existing wall switch. A wall plate is not included. You may be able to re-use your existing wall plate if you are replacing a standard decorator style switch or dimmer. If this is a new installation or your existing wall plate can not be used, we recommend the use of a mid-sized, decorator style wall plate. These are available at most home centers or hardware stores.

It can be used by itself or in three-way installations where a light is controlled from 2 locations such as the top and bottom of a staircase. It is also compatible with four-way installations (three switches & one light) if a second auxiliary switch is used.

Please note: The 45610 Auxiliary Switch must be used with the 45607 Dimmer Switch in three-way installations. Two Auxiliary switches must be used in four-way installations.