Tweeter Surface Angle Mounting |
|
|
Instructions | A | D |
| C | |
|
|
a) Using the Surface Angle Mount Template at the back of the manual, drill two screw holes at the desired mounting location, making sure to choose the correct tweeter orientation. Secure the
Surface Angle Mount Adapter with two 3⁄4"B sheet metal screws as shown in Figure G.
b) Secure the mounting plate to surface angle mount adapter using two 5⁄16" screws.
c) Run the speaker wire from the 408 and | Figure G | |
508GTi Crossover to the wire through hole | TWEETER SURFACE ANGLE INSTALLATION | |
and connect the wire to the tweeter | ||
| ||
making sure to connect + to + and – to – |
| |
by either soldering (preferred) or using |
| |
| ||
d) Push the tweeter down onto the |
| |
mounting plate making sure to line up the |
| |
bayonet tabs with the slots in the tweeter |
| |
housing. |
| |
e) Twist the tweeter clockwise about 1⁄4" to |
| |
lock it into position. |
|
9
