EXISTING CONSTRUCTION

NEW CONSTRUCTION

SP6C, SP8C

Remove the grille from the speaker frame.

≥1/2"

≥1/2"

≥1/2"

Determine the correct speaker location.

Note: Remove the inner template, which is the paint shield, at the

Cut the drywall.

Note: Always allow at least one-half inch between a wall stud and the speaker cutout or

You will need to purchase the correct rough-in frame kit for your model:

SPEAKER MODEL

ROUGH-IN FRAME KIT

SP5

RIF5

SP6

RIF6

SP6C

RIF6C

SP8

RIF8

SP8C

RIF8C

Detailed installation instructions are supplied with the rough-in kit.

PAINTING THE SPEAKER FRAME AND GRILLE

perforation. Use the outer tem- plate when cutting the drywall.

the locking tabs will not be able to swivel into place.

SoundPoint™ Series loud- speakers can be painted to match any decor. If you wish to change their color, the satin finish on the grille and frame will function as a primer coat. Before painting, install the paint shield (inner section of template in the assembly kit) securely into the recess in the

baffle. This will protect the speaker components and baf- fle from paint residue. Use a high-quality spray paint, and apply a thin coat of color.

Be certain the grille perfora- tions remain free of paint. Filling them with paint will diminish the sound quality.

Note: Gently remove the acoustical foam blanket from the grille before painting. Reattach the blanket after the paint has dried.

Connect the speaker wires

Place the frame assembly

Screw down each of the four

to the speaker.

in the wall.

Phillips head screws. The

TROUBLESHOOTING

locking tabs will swivel into

place and secure the unit to

the rear surface of the drywall.

Replace the metal grille.

6

IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:

•Check that receiver/amplifier is on and a source is playing.

•Check all wires and connec- tions between receiver/ampli- fier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

•Review proper operation of your receiver/amplifier.

IF THERE IS NO SOUND COMING FROM ONE SPEAKER:

•Check the “Balance” control on your receiver/amplifier.

•Check all wires and connec- tions between receiver/ampli- fier and speakers. Make sure all wires are connected. Make

sure none of the speaker wires are frayed, cut or punctured.

IF THERE IS LOW (OR NO) BASS OUTPUT:

•Make sure the connections to the left and right “Speaker Inputs” have the correct polar- ity (+ and –).

•Consider adding a powered subwoofer to your system.

•In Dolby* Digital or DTS® modes, make sure your receiver/processor is correctly configured. When using a sub- woofer, make sure the sub- woofer output of the receiver/processor has been enabled. If no subwoofer is being used, make sure the left and right front and rear speakers have been configured as

“LARGE.” See your receiver/processor’s owner’s manual for futher information on correct speaker configura- tion in Dolby Digital, DTS and other surround-sound modes.

IF THE SYSTEM PLAYS AT LOW VOLUMES BUT SHUTS OFF AS VOLUME IS INCREASED:

•Check all wires and connec- tions between receiver/ampli- fier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

•If more than one pair of main speakers is being used, check the minimum-impedance requirements of your receiver/amplifier.

7

Page 3 Page 4
Page 4
Image 4
JBL 8C, 6C specifications Existing Construction NEW Construction, Painting the Speaker Frame and Grille, Troubleshooting
Page 3 Page 4

8C, 6, 6C, 8 specifications

JBL is a renowned name in audio technology, and their series of speakers, namely the JBL 8, 6C, 6, and 8C, exemplify the brand's commitment to delivering high-quality sound and advanced features. These models are designed to cater to a variety of listening environments, making them perfect for both home and commercial installations.

Starting with the JBL 8, this model features a robust woofers that provide deep bass response and clear mids, allowing for a full-bodied sound experience. The tweeter is engineered for extended frequency response, ensuring that high frequencies are reproduced with precision. The speaker is designed using JBL’s advanced acoustic technologies, which analyze sound patterns to minimize distortion and enhance clarity.

The JBL 6C, on the other hand, is an in-ceiling speaker that brings the convenience of discreet audio without compromising on sound quality. Its innovative design allows it to blend seamlessly into any environment while delivering impressive audio performance. Equipped with a wide dispersion pattern, it enables even sound coverage throughout the room, making it an excellent choice for home theaters and multi-room setups.

For those looking for flexibility, the JBL 6 offers versatile positioning options typically suited for bookshelf or stand-mounting. This model ensures high fidelity and is built with high-quality components that contribute to its durability and sound clarity. With its sophisticated crossover design, the JBL 6 presents a balanced performance, ensuring that every note is heard as intended.

Lastly, the JBL 8C is a powerful in-wall speaker perfect for listeners seeking immersive sound without visible speakers. Its advanced technologies, including a built-in amplifier and Bluetooth functionality, enhance user experience by allowing wireless connectivity to various audio devices. This model is ideal for both music lovers and movie enthusiasts who want a high-performance audio solution without the clutter.

Collectively, the JBL 8, 6C, 6, and 8C embody the pinnacle of sound engineering. These speakers integrate cutting-edge technology, robust construction, and sophisticated design, making them suitable for any audio application. Their balance between aesthetics and functionality ensures that users do not have to sacrifice sound quality for style, making them a popular choice among audiophiles and casual listeners alike. With JBL, exceptional audio performance is truly within reach.
Top Page Image Contents