Manuals / Harbor Freight Tools / Power Tools / Sander

Harbor Freight Tools 95088 Operation, INSPECTION, MAINTENANCE, and Cleaning, Troubleshooting

Models: 95088

1 15
Download 15 pages 58.68 Kb
Page 10
Image 10

OPERATION

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on pages 11 through 14.

1.After you have put on the appropriate safety gear covered on page 3 of this manual, and you have installed the sanding sleeve you want to use, plug in the Sander.

2.Turn the sander on using the Switch (80). Always run the Sander for a few seconds before contacting the work piece.

3.Contact the work piece with minimal pressure. If the Spindle Sander is not removing enough material, try a coarser grit sanding sleeve. Keep a firm grip on the stock material as you move the stock material into the spinning sanding sleeve.

4.Occasionally check the sanding sleeves for tears, wear, or fraying. Replace if necessary. Stop using if sanding sleeve is damaged.

5.When you are finished, turn off the Switch (80). Remove the yellow Safety Lock and store it out of the reach of children.

INSPECTION, MAINTENANCE, AND CLEANING

BEFORE EACH USE, inspect the general condition of the Spindle Sander. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.

TROUBLESHOOTING

1.Over time, if the performance of the tool diminishes, or it stops working completely, it may be necessary to replace the Carbon Brushes (34) by removing the Brush Holder (33). This procedure should be completed by a qualified technician. If the Carbon Brushes are not worn down, try cleaning the Carbon Brush tips with an ink eraser.

2.If the Sanding Sleeve stops rotating when you touch it or press the stock material against it, turn off the machine at once. Unplug the machine and check to make sure that the Hex Nut (1) is threaded on tight to the Spindle (55).

SKU 95088

For technical questions, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Page 10
Image 10
Harbor Freight Tools 95088 manual Operation, INSPECTION, MAINTENANCE, and Cleaning, Troubleshooting
Page 9 Page 11

95088 specifications

Harbor Freight Tools has become a well-recognized name in the realm of affordable yet reliable tools. One of their standout products is the Harbor Freight Tools 95088, a versatile and efficient tool that caters to both novice and professional users alike.

The Harbor Freight Tools 95088 is primarily a 12-inch sliding compound miter saw, designed to deliver precision and power in cutting various materials. It is particularly praised for its dual-bevel capabilities, allowing users to make angled cuts in both left and right orientations. This feature is indispensable for complex cuts, making the 95088 an ideal choice for framing, molding, and other intricate woodworking projects.

One of the main highlights of the 95088 is its robust 15-amp motor, which delivers an impressive no-load speed of up to 4,800 RPM. This powerful motor ensures that even thick materials can be cut with ease and efficiency. The saw is equipped with a laser guide system that enhances accuracy, allowing users to see the cut line clearly and make precise adjustments before cutting.

The 95088 also features a large table that provides ample support for long workpieces, coupled with extension wings to further accommodate larger materials. This design enhances stability and helps prevent the material from wobbling during cuts. Additionally, the saw has a positive stop system with commonly used angles, making it easy to switch between different cutting positions without unnecessary adjustments.

In terms of safety, the Harbor Freight Tools 95088 is equipped with a blade guard that covers the blade during operation, reducing the risk of accidents. The electric brake feature stops the blade quickly when the trigger is released, which is crucial for maintaining control.

Another notable characteristic of the Harbor Freight Tools 95088 is its portability. With a lightweight design and built-in carrying handle, the saw is easy to transport to job sites or storage. The saw is ideally suited for contractors, DIY enthusiasts, and hobbyists who require a dependable tool that combines functionality with value.

In summary, the Harbor Freight Tools 95088 offers an impressive array of features, including its powerful motor, dual-bevel capabilities, laser guide, and user-friendly safety features. This makes it a top choice for anyone looking for a reliable miter saw that delivers both performance and affordability.