14.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

15.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Always wear ANSI approved safety goggles and a dust mask/respirator when using or performing maintenance on this tool.

TOOL USE AND CARE

16.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

17.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not force the tool and do not use the tool for a purpose for which it is not intended.

18.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

19.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. Always unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

20.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

21.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

22.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

23.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

24.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

25.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use

SKU 95088

For technical questions, please call 1-800-444-3353.

Page

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 95088 manual Tool USE and Care
Page 3 Page 5

95088 specifications

Harbor Freight Tools has become a well-recognized name in the realm of affordable yet reliable tools. One of their standout products is the Harbor Freight Tools 95088, a versatile and efficient tool that caters to both novice and professional users alike.

The Harbor Freight Tools 95088 is primarily a 12-inch sliding compound miter saw, designed to deliver precision and power in cutting various materials. It is particularly praised for its dual-bevel capabilities, allowing users to make angled cuts in both left and right orientations. This feature is indispensable for complex cuts, making the 95088 an ideal choice for framing, molding, and other intricate woodworking projects.

One of the main highlights of the 95088 is its robust 15-amp motor, which delivers an impressive no-load speed of up to 4,800 RPM. This powerful motor ensures that even thick materials can be cut with ease and efficiency. The saw is equipped with a laser guide system that enhances accuracy, allowing users to see the cut line clearly and make precise adjustments before cutting.

The 95088 also features a large table that provides ample support for long workpieces, coupled with extension wings to further accommodate larger materials. This design enhances stability and helps prevent the material from wobbling during cuts. Additionally, the saw has a positive stop system with commonly used angles, making it easy to switch between different cutting positions without unnecessary adjustments.

In terms of safety, the Harbor Freight Tools 95088 is equipped with a blade guard that covers the blade during operation, reducing the risk of accidents. The electric brake feature stops the blade quickly when the trigger is released, which is crucial for maintaining control.

Another notable characteristic of the Harbor Freight Tools 95088 is its portability. With a lightweight design and built-in carrying handle, the saw is easy to transport to job sites or storage. The saw is ideally suited for contractors, DIY enthusiasts, and hobbyists who require a dependable tool that combines functionality with value.

In summary, the Harbor Freight Tools 95088 offers an impressive array of features, including its powerful motor, dual-bevel capabilities, laser guide, and user-friendly safety features. This makes it a top choice for anyone looking for a reliable miter saw that delivers both performance and affordability.
Top Page Image Contents