of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

1.Maintain labels and nameplates on the Sander. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.Avoid unintentional starting. Make sure you are prepared to begin work before plugging in the Sander.

3.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

In addition, people with pacemakers should adhere to the following:

•Avoid operating power tools alone.

•If powered via a power cord be certain that the tool is properly grounded. A ground fault interrupt (GFCI) system is also a good precaution. This inexpensive device is a good safety measure because it prevents a sustained electrical shock.

•Properly maintain and inspect all tools before use to avoid electrical shock.

4.Never leave the Sander unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

5.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

•Lead from lead-based paints.

•Crystalline silica from bricks and cement or other masonry products.

•Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

(California Health & Safety Code § 25249.5, et seq.)

6.Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic.When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact.

7.Warning! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Note: Performance of this tool (if powered by line voltage) may vary depending

SKU 95088

For technical questions, please call 1-800-444-3353.

Page

Page 4 Page 6
Page 5
Image 5
Harbor Freight Tools 95088 manual Specific Safety Rules
Page 4 Page 6

95088 specifications

Harbor Freight Tools has become a well-recognized name in the realm of affordable yet reliable tools. One of their standout products is the Harbor Freight Tools 95088, a versatile and efficient tool that caters to both novice and professional users alike.

The Harbor Freight Tools 95088 is primarily a 12-inch sliding compound miter saw, designed to deliver precision and power in cutting various materials. It is particularly praised for its dual-bevel capabilities, allowing users to make angled cuts in both left and right orientations. This feature is indispensable for complex cuts, making the 95088 an ideal choice for framing, molding, and other intricate woodworking projects.

One of the main highlights of the 95088 is its robust 15-amp motor, which delivers an impressive no-load speed of up to 4,800 RPM. This powerful motor ensures that even thick materials can be cut with ease and efficiency. The saw is equipped with a laser guide system that enhances accuracy, allowing users to see the cut line clearly and make precise adjustments before cutting.

The 95088 also features a large table that provides ample support for long workpieces, coupled with extension wings to further accommodate larger materials. This design enhances stability and helps prevent the material from wobbling during cuts. Additionally, the saw has a positive stop system with commonly used angles, making it easy to switch between different cutting positions without unnecessary adjustments.

In terms of safety, the Harbor Freight Tools 95088 is equipped with a blade guard that covers the blade during operation, reducing the risk of accidents. The electric brake feature stops the blade quickly when the trigger is released, which is crucial for maintaining control.

Another notable characteristic of the Harbor Freight Tools 95088 is its portability. With a lightweight design and built-in carrying handle, the saw is easy to transport to job sites or storage. The saw is ideally suited for contractors, DIY enthusiasts, and hobbyists who require a dependable tool that combines functionality with value.

In summary, the Harbor Freight Tools 95088 offers an impressive array of features, including its powerful motor, dual-bevel capabilities, laser guide, and user-friendly safety features. This makes it a top choice for anyone looking for a reliable miter saw that delivers both performance and affordability.
Top Page Image Contents