PRODUCT SPECIFICATIONS
Electrical Requirements | 120 VAC, 60 Hz, 3.5 Amps |
| |
Speed | 2,000 RPM, 5/8” Stroke |
| |
Oscillating Range | 58 OPM |
| |
Dust Port | 236479 | ||
Construction | 100% sealed ball bearing construction | ||
| |||
Table Size |
| ||
Overall Dimensions |
| ||
Spindle Dimensions | 1/2” x 1.5 mm thread |
| |
|
|
| |
Tool Weight | 33 Lb. |
|
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly dia- gram, or write month and year of purchase if product has no number. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Make sure there is adequate surrounding workspace.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
SKU 95088 | For technical questions, please call | Page |
