JBL AS65C, AS8, AS5, AS SUB setup guide New Construction, After the Drywall is Installed, Step One

AS Series Owner’s Manual 9/11/98 12:51 PM Page 6

New Construction

Step One:

Remove the grille from the speaker frame.

	≥1-1/2"
≥1-1/2"	≥1-1/2"

Step Two:

Determine the correct speaker location.

Step Three:

Attach the proper mounting brackets, marked and preset at 3/8", 1/2", 5/8", and 3/4", corre- sponding to the thickness of the dry wall, to the speaker frame.

Step Four:

Nail or screw the speaker-frame assembly to the wall studs and route the wires through the frame opening.

After the Drywall is Installed

Step Five:	Step Six:	Step Seven:
Cut the drywall.	Connect the speaker wires to	Replace the metal grille.
	the baffle assembly and install
	baffle assembly in frame. Do
	not overtighten the baffle
	screws.