Station Tuning
1 | 3 | 12 | 13 | 14 |
Installing and Removing the Detachable Face
To Install / attach the faceplate:
2
PWR
MODE 
SH.
SR
FLIP DOWN / COMPACT DISC PLAYER
BD/FN | 2 INT | 3 RPT |
1 |
4 RDM
HI - POWER 4x45Watts
5 | 6 |
MUT
MARINE | 0. LD |
7.SCN | .PS |
.A | |
| 9 |
| IS |
| 8.D |
15
Place the detachable face place onto the radio one side at a time so that the grooved edge of the face plate lines up directly with the connecting piece on the radio. The face plate should fit easily inside the plastic trim. When the face plate is securely in place, a distinct “click” will be heard, indicating that it is locked correctly in place.
4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 16 | 17 | 18 |
1. Manual/Seek tuning buttons (15): Press this button quickly to activate the Seek mode. The Seek mode will automatically seek up or down the wave band and stop at the next station of sufficient signal strength. Press and hold tuning buttons for 2 seconds to enter manual tuning mode. The unit will revert back to Seek mode after 10 seconds without use.
2.Manual Station store: Select the desired band and tune to a radio station to be memorized. Choose the preset button memory
The station will now be entered into the preset memory. 6 stations can be memorized on each of the FM1, FM2, FM3, AM1, AM2.
3.A.PS - Auto store function (18)
Press and hold button (18) for approximately 2 seconds until you hear a beep which confirms the memory function is engaged. The unit will "SEARCH" for six strong stations and automatically store them on buttons 1 - 6.
You can override the preset station on any button by manually setting a new frequency.
4. Scan (16)
In Radio mode, press the SCAN (16) button to scan strong stations for previewing. At the desired station press the "SCAN (16)" button again to stop scanning.
5. Program Memory Scan
Momentarily press A.PS and the unit will scan for stored stations.
Momentarily press it again to stop scanning.
To remove the face plate:
1. Press Release button, then the front panel will open (fold down).
|
| Release button |
MUT |
|
|
MARINE | 0. LD | Front Panel |
4x45Watts |
| .PS |
7.SCN |
| 9.A |
6 | 8.DIS |
|
2.Grip the release section and pull the front panel forward.
- Be careful not to grip the front panel display too tightly or to drop the panel.
Release section
3.Close the inner cover.
-After removing the front panel, be sure to close the inner cover to prevent dirt, dust or other foreign matter from entering the CD slot.
Inner Cover
4.Keep the detachable front panel in the protective case provided.
Carrying Case
Front Panel
10 | 3 |
