troubleshooting your jbl on stage micro II
Technical Specifications | Troubleshooting |
|
|
| Symptom | Possible Problem | Solution |
|
|
|
|
Frequency Response: | No sound from the | No power to the system | Ensure that the power supply is connected to a live |
70Hz – 20kHz | JBL On Stage Micro II | Power adapter plug is not | power source and properly connected to the JBL On |
Power Consumption: | speaker system | Stage Micro II. Note: When the JBL On Stage Micro II | |
inserted correctly | is powered, a green power LED on the JBL On Stage | ||
10W Maximum |
|
| Micro II should light up. |
|
|
| |
Power Input: |
|
|
|
| No volume or low volume | Touch the volume “Up” (+) pad on the volume | |
6V/1.5A |
| ||
|
| control to unmute and/or increase the system volume | |
|
|
| |
JBL On Stage Micro II Transducer: |
|
| level. |
(2) 1" Full range per channel |
|
| Note: Touching the volume “Down” |
|
|
| |
Dimensions: |
|
| the system volume. Touching both the (+) and |
Diameter – 6" (150mm) |
|
| volume control pads at the same time will mute the |
Height – |
|
| system. |
System Weight: |
|
|
|
| Input source is low | Increase the volume level on the audio source device. | |
2.22 lb (1.01kg) |
|
|
|
Battery: |
| Low or drained batteries | Replace the batteries. |
Size – AAA |
|
|
|
| iPhone/iPod is paused | Press the Play button on the iPhone/iPod or remote | |
Type – Alkaline, NiMh |
| ||
| control. | ||
Quantity – 4 |
|
| |
|
|
| |
|
|
|
|
DO NOT MIX BATTERY TYPES. |
| iPhone/iPod is paused | Note: If the iPhone/iPod is paused more than 10 min- |
DO NOT MIX CHARGED AND |
| utes, press the JBL On Stage Micro II Power button to | |
|
| turn the unit back on. Press either (+) or | |
PARTIALLY CHARGED BATTERIES. |
|
| to unmute. |
BATTERIES WILL NOT RECHARGE |
|
|
|
WHILE IN JBL On Stage MICRO II. |
|
|
|
If you have any questions or need further assistance, please visit www.jbl.com.
These specifications are subject to change without notice.
5
