JBL S5160 General Information, 4.1JBL SYNTHESIS ONE SUGGESTED RACK-MOUNTINGORDER, Top #1, SDP-40

CONNECTING4.YOUR0 JBL SYNTHESIS SYSTEM

General Information

A Synthesis One installation utilizing the benefits of bi- amplification of the front speakers incorporates a total of four power amplifiers; two S5160’s, and two S800’s. Eight of the 10 channels on the S5160’s are to be used for driving the high-frequency and low-frequency inputs on the left, center and right speakers, as well as the two side ambient speakers, as indicated in the chart on page 8. Please also refer to the connection diagram on page 14.

Use the simplified connection diagrams on the following pages to help you understand how to connect the S5160 amplifier to a JBL Synthesis system. These diagrams are intended to show the signal flow through the system. For more detail in making these connections, please refer to the JBL Synthesis Certified Dealer Installation Manual.

Connect DIN and audio cables between system components, as shown on the following pages. Make sure that on all power amplifiers the Power switches are in the depressed (ON) position and that the Manual On/Auto On switches ¶ are in the Auto On position. Operated in this mode, all of the components will turn on with one touch of the Power switch on the surround processor’s remote control.

4.1JBL SYNTHESIS ONE:

SUGGESTED RACK-MOUNTING ORDER

Top #1

SDP-40

#2

SDEC-1000A

#3

S800

#4

S5160

11