PHYSICAL5.0
CONSIDERATIONS
Installation of the S5160 is a straightforward process.
IMPORTANT: The amplifier must be installed following the directions described below. To ensure adequate performance and safety, never install the amplifier with less free space around the amplifier than that specified.
IMPORTANT: For rack mounting, we recommend using
NOTE: Heavy equipment should not be supported solely by the front mounting locations. It is recom- mended that additional rear support be used.
1. The S5160 power amplifier has been designed to be mounted in EIA standard racks or stacked freestanding as long as there is 4 inches (10cm) of free space around the amplifier (top, sides and rear). If the S5160 is being mounted in a rack, it is suggested that its feet be removed prior to installation. If the S5160 will be stacked with other components, use the feet that came attached to the unit. This will ensure that there is sufficient air space underneath so that heat can be dissipated effectively.
2. Make sure that the amplifiers are located in a well- ventilated, cool area. Be certain that the front and rear panels are not obstructed, as the cooling fan brings air in from the front and expels it at the rear. It is very important not to obstruct the airflow from the center front panel; heat buildup and premature failure may occur.
14
