English
CONNECTIONS
6285&(&211(&7,216
$QDORJ Use the supplied stereo audio cable to connect the soundbar’s Source 1 (analog) input to your TV’s stereo audio output. If your TV has two sets of audio output jacks, use the set that has a fixed (not variable) output level. This will let you turn your TV’s speakers all the way off while the TV still supplies a constant audio signal to the soundbar.
'LJLWDO If your DVD player, cable tuner or satellite tuner has an optical digital output, you can use an optical digital audio cable to connect it to the soundbar’s Source 2 (optical digital) input.
6%6RXQGEDU
NOTE: If your DVD player, cable tuner or satellite tuner does not have an optical digital output, you can connect its analog audio output to your TV. The TV will send its audio signal to the soundbar through the analog connection described above.
32:(5&211(&7,216
After verifying that all of the source connections have been made properly, plug the supplied power cords into the soundbar’s and subwoofer’s Power Cord connectors, and plug the other ends into active, unswitched AC outlets. Do NOT plug these cords into the accessory outlets found on some audio components.
79
Stereo 
Audio Cable 
AUDIO(supplied)
OUT
Power
Cord
Optical Digital Audio Cable (not supplied)
To Unswitched AC Qutlet
'9'3OD\HURU &DEOH6DWHOOLWH7XQHU
67;0*(3 +0.0;(3 6<;
