JBL SB300 86,1* 2856281%$56, Power Button Power, 6RXQGEDU6XEZRRIHU, Volume Up/Down, Mute

86,1*<2856281'%$56<67(0

7851,1*7+(6281'%$521$1'2))

Set the soundbar’s Power switcn to the “On” position.

3$,5,1*7+(81,76)25:,5(/(6623(5$7,21

After turning the soundbar and subwoofer on for the first time, you will need to “pair” the subwoofer and soundbar so they both operate at the same wireless frequency. To pair the units, press the Wireless Pairing switches on both units within 30 seconds. The units will communicate with each other and operate at the same frequency.

Phase

0° 180°

Press the Power button on either the soundbar or the remote to turn the soundbar on. To put the soundbar in the Standby mode, press either Power button while the soundbar is on.

Power Button

Power

On/Off Button

Aux Digital

If you do not press the Power button, the soundbar will automatically go into the Standby mode approximately 15 minutes after the audio signal ceases. NOTE: If you have put the soundbar into the Standby mode by pressing the Power button, you must manually turn it on by pressing the Power button again. If the soundbar has automatically gone into the Standby mode 15 minutes after the audio signal has ceased, it will automatically turn itself on when it receives an audio signal at either the analog (Aux) input or the optical digital input.

7851,1*7+(68%:22)(521$1'2))

Set the subwoofer’s Power switch to the “On” position. The subwoofer will automatically attempt to establish pairing with the soundbar (the subwoofer’s LED will flash blue). If pairing is not established within one minute, the subwoofer will enter the Standby mode (its LED will turn amber). If pairing is established, the subwoofer will turn on (its LED will light blue continuously).

The subwoofer will remain on for approximately one minute after the soundbar enters the Standby mode, or for approximately 15 minutes after the audio signal ceases.

If you will be away from home for an extended period of time, or if you will not be using the system for an extended period, set the subwoofer’s Power switch to the “Off” position.

Pairing

6RXQGEDU6XEZRRIHU

NOTE: The maximum wireless operating distance between the soundbar and subwoofer is approximately 50 feet (15.3m).

$'-867,1*7+(6<67(0ҋ692/80(

Press the soundbar’s or remote’s Volume Up and Down buttons to raise and lower the system’s volume one step at a time. Hold down the buttons to continuously raise or lower the volume.

Volume
Button		Vol.+
		Volume Up/Down
	Mute	Buttons
		Vol.–

For the best sound, we recommend turning your TV’s built-in speakers off. Consult your TV’s owner’s manual to find out how to do this.

087,1*7+(6<67(0

Momentarily press the soundbar’s Power button or press the remote’s Mute button to mute the system. (The Power Indicator flashes blue.) Momentarily press the soundbar’s Power button or press the remote’s Mute button again to un-mute the system. (The Power Indicator turns to a steady blue.)

Power		Vol.+
Button
	Mute
	Button	Mute
		Vol.–

6855281'02'(%877216

These buttons switch the sound between normal stereo (the Surround Mode Indicator lights white) and 3-D Surround (the Surround Mode Indicator lights blue). The 3-D Surround setting will produce a complete surround-sound experience for anyone sitting in front of and several feet away from the soundbar. Although it is particularly effective when watching movies, you can also try the 3-D Surround setting for music.

Surround-Mode	Input	Input
	Aux	Digital
Button
	Stereo	Surround

Vol.+