JBL Simply Cinema, SCS125 setup guide Read first! Important Safety Precautions

read first! Important Safety Precautions!

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To prevent electric shock, do not remove the grounding plug on the power cord, or use any plug or extension cord that does not have a grounding plug provided.

Make certain that the

AC outlet is properly grounded.

Do not use an adapter plug

with this product.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

1.Read Instructions. All the safety and operating instructions should be read before the product is operated.

2.Retain Instructions. The safety and operating instructions should be retained for future reference.

3.Heed Warnings. All warnings on the product and in the operating instructions should be adhered to.

4.Follow Instructions. All operating and use instructions should be followed.

5.Cleaning. Unplug this product from the

wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments. Do not use attachments not recommended by the product manufacturer, as they may cause hazards.

7.Water and Moisture. Do not use this product near water – for example, near a bathtub, wash bowl, kitchen sink or laundry tub; in a wet basement; near a swimming pool; and the like.

8.Accessories. Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or an adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the prod- uct. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recom- mended by the manufacturer.

9. A Product and Cart Combination Should Be Moved

with Care. Quick stops, excessive force and uneven surfaces may

cause the product and cart combination to overturn.

10.Ventilation. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not

be placed in a built-in installation such as a	lines or circuits, as contact with them might
bookcase or rack unless proper ventilation is	be fatal.
provided or the manufacturer’s instructions	18. Overloading. Do not overload wall out-
have been adhered to.	lets, extension cords or integral convenience
11. Power Sources. This product should be	receptacles, as this can result in a risk of
operated only from the type of power source	fire or electric shock.
indicated on the marking label. If you are	19. Object and Liquid Entry. Never push
not sure of the type of power supply to your	objects of any kind into this product through
home, consult your product dealer or local	openings, as they may touch dangerous volt-
power company. For products intended to	age points or short-out parts that could
operate from battery power or other sources,	result in a fire or electric shock. Never spill
refer to the operating instructions.	liquid of any kind on the product.
12. Grounding or Polarization. This product	20. Servicing. Do not attempt to service
may be equipped with a polarized alternating-	this product yourself, as opening or
current line plug (a plug having one blade	removing covers may expose you to
wider than the other). This plug will fit into	dangerous voltage or other hazards. Refer
the power outlet only one way. This is a	all servicing to qualified service personnel.
safety feature. If you are unable to insert	21. Damage Requiring Service. Unplug this
the plug fully into the outlet, try reversing	product from the wall outlet and refer servic-
the plug. If the plug should still fail to fit,	ing to qualified service personnel under the
contact your electrician to replace your	following conditions:
obsolete outlet. Do not defeat the safety	a. The power-supply cord or the plug has
purpose of the polarized plug.	been damaged; or
13. Power-Cord Protection. Power-supply	b. Objects have fallen onto, or liquid has
cords should be routed so that they are not	been spilled into, the product; or
likely to be walked on or pinched by items	c. The product has been exposed to rain or
placed upon or against them, paying particu-	water; or
lar attention to cords at plugs, convenience	d. The product does not operate normally
receptacles and the point where they exit	when following the operating instructions.
from the product.	Adjust only those controls that are covered
14. Nonuse Periods. The power cord of the	by the operating instructions, as an improper
product should be unplugged from the outlet	adjustment of other controls may result in
when left unused for long periods of time.	damage and will often require extensive work

15.Outdoor Antenna Grounding. If an out- by a qualified technician to restore the prod-

side antenna or a cable system is connected	uct to its normal operation; or
to the product, be sure the antenna or cable	e. The product has been dropped or damaged
system is grounded so as to provide some	in any way; or
protection against voltage surges and built-	f. The product exhibits a distinct change
up static charges. Article 810 of the National	in performance – this indicates a need for
Electrical Code, ANSI/NFPA 70, provides	service.
information with regard to proper grounding	22. Replacement Parts. When replacement
of the mast and supporting structure,	parts are required, be sure the service tech-
grounding of the lead-in wire to an antenna	nician has used replacement parts specified
discharge unit, size of grounding conductors,	by the manufacturer or that have the
location of antenna-discharge unit, connec-	same characteristics as the original part.
tion to grounding electrodes and require-	Unauthorized substitutions may result in fire,
ments for the grounding electrode. See	electric shock or other hazards.
Figure 1.	23. Safety Check. Upon completion of any
16. Lightning. For added protection for this	service or repairs to this product, ask the
product during a lightning storm, or when it	service technician to perform safety checks
is left unattended and unused for long peri-	to determine that the product is in proper
ods of time, unplug it from the wall outlet	operating condition.
and disconnect the antenna or cable system.	24. Wall or Ceiling Mounting. The product
This will prevent damage to the product due	should be mounted to a wall or ceiling only
to lightning and power-line surges.	as recommended by the manufacturer.
17. Power Lines. An outside antenna system	25. Heat. The product should be situated
should not be located in the vicinity of over-	away from heat sources such as radiators,
head power lines, other electric light or	heat registers, stoves or other products
power circuits, or where it can fall into such	(including amplifiers) that produce heat.
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
Figure 1.
Example of Antenna Grounding as per
National Electrical Code ANSI/NFPA 70		Antenna Lead-In Wire￿
		￿
		Ground Clamp￿
		￿
		Antenna Discharge Unit (NEC Section 810-20)￿
		￿
		Grounding Conductors (NEC Section 810-21)￿
		￿
		Electric Service Equipment￿
		￿
		Ground Clamps￿
		￿
		Power Service Grounding Electrode System￿
		(NEC Art 250, Part H)

Part No. JBLULB 6/96