Turning the System Off | JBL Synthesis specification

BASIC

OPERATIONS1.0

1.5 Turning the System Off

There is no preferred order of components when turning the system off. However, there is one caution you should follow:

NOTE: Do not turn the system off while any Source Device is running and producing sound. Always make sure all Source Devices are in “Idle” before pressing the main POWER button.

Failure to do this can produce a noticeable “pop”, and can, over time, damage your components. If you need to turn off the sound to the system suddenly, for example, to take a phone call or to reply to someone, press the MUTE button.

Notes

Page 7

Image 7

JBL Synthesis owner manual Turning the System Off

Contents

Manual On Long Island call System Installed for Contents Selecting Source Devices Powering UpBasic Remote Control Operations Basic Operations Basic Cinema Operations Adjusting the Master VolumeAdjusting the Cinema Volume Basic Link Forward See Advanced Operations Adjusting the Music VolumeAdjusting the Music Balance Basic Music Operations Turning the System Off Link Back See , Ambience Level AdjustmentAdvanced Operations Advanced Cinema Operations Center Speaker Level Panorama AdjustmentSetting Time Delay Advanced Bass EQ Woofer Equalization Sibilant Filter To activate this feature, press the button markedHi Freq. EQ 70mm Cinema ModesTo activate this mode, press the button marked 35 MM Movie Dolby THX Advanced Music Operations Switching to the Music System Rock Music ModesTo engage this mode, simply press the POP button To engage this mode, simply press the Jazz button Hall JazzTo engage this mode, simply press the Hall 1 button Advanced Remote Control Operations Mute Input Level Knob Bass EQ Knob Front Panel Controls Audio Service ServiceGeneral Service Policy SERVICE3.0 Synthesis One Date Owner InstallerCalibration Templates Synthesis Two Calibration TEMPLATES4.0