JBL Professional 42C, 47HC, 40CS/T manual Specifications, Control 47C/T, Control 47LP

				SPECIFICATIONS
Control 47C/T:
	Frequency Range (-10 dB)1:			55 Hz - 20 kHz
Frequency Response (± 3 dB)			1:	75 Hz - 17 kHz
		Power Capacity	2:	150 Watts Continuous Program Power
Nominal Sensitivity (2.83V/1m)1:				75 Watts Continuous Pink Noise
				91 dB
		Nominal Coverage Angle	3:	120° conical coverage
		Directivity Factor (Q)3:		6.5
		Directivity Index (DI)3:		7.9dB
		Rated Maximum SPL:		110 dB @ 1 m (3.3 ft) average, 116 dB peak
		Rated Impedance:		8 Ω (in bypass mode)
		Transformer Taps:		60W 30W, 15W, (& 7.5W @ 70V)
		LF Driver:		165mm (6.5 in) with polypropylene cone, butyl rubber surround,
				copper-clad coil, vented aluminum former.
		HF Driver:		25mm (1 in) soft dome w/ dampening, ferrofluid-cooled.
		Input Connectors:		Two removeable locking 2-pin connectors with screw-down terminals.
				Max wire 12 AWG (2.5 mm). Key: 1) + in, 2) - in, A) + loop thru, B) - loop thru
		Knockouts:		Two (top and side)
		Safety Agency:		Designed for the requirements of use in air handling spaces per UL1480,
				UL2043, NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
		Dimensions:		Ø 305 mm (12.0 in) diameter x 359 mm (10.2 in) mounting depth
		Cutout Size:		282 mm (11.1 in)
		Ceiling Thickness Range:		Accommodates tiles / drywall up to 70 mm (2.75 inches) thick
		Net Weight:		5 kg (11 lbs)
		Included Accessories:		press-in grille, C-ring support backing plate, 2 tile support rails, knockout strain relief,
				cutout template, paint shield
Control 47LP:
	Frequency Range (-10 dB)1:			68 Hz - 20 kHz
Frequency Response (± 3 dB)			1:	100 Hz - 17 kHz
		Power Capacity	2:	150 Watts Continuous Program Power
Nominal Sensitivity (2.83V/1m)1:				75 Watts Continuous Pink Noise
				91 dB
		Nominal Coverage Angle	3:	120° conical coverage
		Directivity Factor (Q)3:		6.7
		Directivity Index (DI)3:		7.9dB
		Rated Maximum SPL:		110 dB @ 1 m (3.3 ft) average, 116 dB peak
		Rated Impedance:		8 Ω (in bypass mode)
		Transformer Taps:		60W 30W, 15W, (& 7.5W @ 70V)
		LF Driver:		165mm (6.5 in) with polypropylene cone, butyl rubber surround,
				copper-clad coil, vented aluminum former.
		HF Driver: 25mm (1 in) soft dome w/ dampening, ferrofluid-cooled.
		Input Connectors:		Two removeable locking 2-pin connectors with screw-down terminals.
				Max wire 12 AWG (2.5 mm). Key: 1) + in, 2) - in, A) + loop thru, B) - loop thru
		Knockouts:		Two (top and side)
		Safety Agency:		Designed for the requirements of use in air handling spaces per UL1480,
				UL2043, NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
		Dimensions:		Ø 305 mm (12.0 in) diameter x 142 mm (5.6 in) mounting depth
		Cutout Size:		282 mm (11.1 in)
		Ceiling Thickness Range:		Accommodates tiles / drywall up to 70 mm (2.75 inches) thick
		Net Weight:		4.3 kg (9.5 lbs)
		Included Accessories:		press-in grille, C-ring support backing plate, 2 tile support rails, knockout strain relief,
				cutout template, paint shield

8JBL Professional Control Contractor 40 Series