JBL Professional 47C/T, 40CS/T, 47LP manual Control 47HC, Control 42C

SPECIFICATIONS

Control 47HC:
Frequency Range (-10 dB)1:		55 Hz - 17 kHz
Frequency Response (± 3 dB)	1:	70 Hz - 14 kHz
Power Capacity	2:	150 Watts Continuous Program Power
Nominal Sensitivity (2.83V/1m)1:		75 Watts Continuous Pink Noise
		93 dB
Nominal Coverage Angle	3:	75° conical coverage
Directivity Factor (Q)3:		10.2
Directivity Index (DI)3:		12.0dB
Rated Maximum SPL:		112 dB @ 1 m (3.3 ft) average, 114 dB peak
Rated Impedance:		8Ω (in bypass mode)
Transformer Taps:		60W 30W, 15W, (& 7.5W @ 70V)
LF Driver:		165mm (6.5 in) with polypropylene cone, butyl rubber surround,
		copper-clad coil, vented aluminum former.
HF Driver:		25mm (1 in) soft dome w/ dampening, ferrofluid-cooled.
Input Connectors:		Two removeable locking 2-pin connectors with screw-down terminals.
		Max wire 12 AWG (2.5 mm). Key: 1) + in, 2) - in, A) + loop thru, B) - loop thru
Knockouts:		Two (top and side)
Safety Agency:		Designed for the requirements of use in air handling spaces per UL1480,
		UL2043, NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
Dimensions:		Ø 346 mm (13.6 in) diameter x 353 mm (13.9 in) mounting depth
Cutout Size:		307 mm (12.1 in)
Ceiling Thickness Range:		Accommodates tiles / drywall up to 70 mm (2.75 inches) thick
Net Weight:		6.4 kg (14 lbs)
Included Accessories:		press-in grille, C-ring support backing plate, 2 tile support rails, knockout strain relief,
		cutout template, paint shield
Control 42C:
Frequency Range (-10 dB)1:		140 Hz - 20 kHz
Frequency Response (± 3 dB)	1:	180 Hz - 17 kHz
Power Capacity	2:	30 Watts Continuous Program Power
Nominal Sensitivity (2.83V/1m)1:		15 Watts Continuous Pink Noise
		82 dB
Nominal Coverage Angle	3:	160° conical coverage
Directivity Factor (Q)	3:	6.6
Directivity Index (DI)	3:	6.8dB
Rated Maximum SPL:		94 dB @ 1 m (3.3 ft) average, 100 dB peak
Rated Impedance:		16Ω
Driver:		60mm (2.5 in) mid-high
Input Connectors:		Two removeable locking 2-pin connectors with screw-down terminals.
		Max wire 12 AWG (2.5 mm). Key: 1) + in, 2) - in, A) + loop thru, B) - loop thru
Knockouts:		Two (top and side)
Safety Agency:		Designed for the requirements of use in air handling spaces per UL1480,
		UL2043, NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
Dimensions:		Ø 127 mm (5.0 in) diameter x 97 mm (3.8 in) mounting depth
Cutout Size:		104 mm (4.1 in)
Ceiling Thickness Range:		Accommodates tiles / drywall up to 27 mm (1.06 inches) thick
Net Weight:		0.7 kg (1.6 lbs)
Included Accessories:		press-in grille, C-ring support backing plate, knockout strain relief, cutout template, paint shield

JBL Professional Control Contractor 40 Series 9