Indicators

PEAK / SIGNAL

The PEAK / SIGNAL LED (Light Emitting Diode) is a two-color device. Red indicates that the system is approaching clipping. The threshold for this light is actually about 2 dB below clipping. An occasional flicker of the red LED on the loudest peaks is acceptable. If this LED remains red for more than the duration of brief dynamic peaks, the system is being overdriven. Continuously over driving the system will result in unpleasant and fatiguing distortion and may lead to premature failure of your speaker system.

If the red LED illuminates excessively:

•Reduce INPUT 1 and INPUT 2 & 3.

•Reduce the output level of the mixer, musical instrument, or other source to the speaker.

Green indicates a usable signal is present at INPUT 1 and/or INPUT 2 & 3.

MIC

This LED illuminates to indicate that the MIC/LINE switch is in the MIC (depressed) position.

MIX LOOP

O

U

T

P

U

T

1

I

N P U T

2 & 3

2

3

MIC LINE 1

R-PEAK

G-SIGNAL

2 & 3

VOLTAGE SELECTION AND FUSES

Changing Voltage

Your EON10 G2 will typically be set at the factory to accommodate the power mains voltage in your area. Before you set up your EON10 G2 for the first time it is a good idea to verify that the setting of the selector is appropriate for the power in your area. Directly above the power switch you will see a seal that indicates the factory setting for the voltage. If the voltage indicated is correct for your area, go ahead and power up your EON10 G2.

In the event that you do need to change the voltage selection:

•Make sure that the AC is disconnected from the speaker.

•Directly above the power switch on the speaker is a voltage selector. Peel off the factory-applied seal.

•Set the voltage selector switch to the 115V or 230V setting as required for your area.

•After having reconfirmed that the correct voltage is selected, connect the AC (IEC connector) and power the unit up.

DO NOT UNDER ANY CIRCUMSTANCES OPERATE THE UNIT WITH THE WRONG

VOLTAGE SELECTED. DOING SO MAY RESULT IN SERIOUS DAMAGE TO YOUR

SPEAKER SYSTEM WHICH WILL NOT BE COVERED BY WARRANTY.

Fuse Replacement

The EON10 G2 has no user-serviceable fuses. Failure of fuses is most frequently a symptom of problems requiring service by a competent technician.

10

Page 9 Page 11
Page 10
Image 10
JBL Professional G2 manual Indicators
Page 9 Page 11

G2 specifications

JBL Professional G2 series speakers represent a new standard in sound reproduction, boasting a range of features and technologies that cater to both professional audio engineers and casual users. With an emphasis on clarity, power, and durability, the G2 series is ideal for live sound applications, installations, and studio monitoring.

One of the standout characteristics of the G2 series is its advanced driver technology. The speakers are equipped with JBL’s patented Differential Drive woofers, designed to provide high output while reducing distortion. This technology allows the speakers to deliver impressive low frequencies without compromising clarity across the mid and high ranges, ensuring a balanced sound experience. The high-frequency compression drivers are engineered to handle high sound pressure levels, making these speakers suitable for a variety of venues, from small clubs to large concert halls.

The G2 series also features a smart crossover design that optimizes the frequency range for both the woofer and tweeter, enabling seamless integration between the drivers. This results in a coherent and immersive soundstage, allowing listeners to experience music as it was intended. Additionally, the incorporation of high-quality materials in the speaker construction enhances durability, making the G2 series robust enough to withstand the rigors of touring and heavy usage.

Portability is another key aspect of the G2 series, as JBL has designed these speakers to be lightweight and easy to transport. Integrated handles and mounting points enhance usability during setup and breakdown, catering to the needs of mobile sound engineers. Furthermore, the speakers are available in various configurations, including passive and powered versions, allowing users to choose the best fit for their specific requirements.

Connectivity options are also flexible, with XLR and TRS inputs that enable easy integration into existing audio setups. The G2 series can accommodate a wide range of audio gear, ensuring compatibility across different systems.

In summary, JBL Professional G2 series speakers are engineered for high performance and reliability. Their combination of advanced driver technology, smart crossover design, and portable features make them a perfect choice for professionals seeking exceptional sound quality in any setting. Whether used for live performances, installations, or studio monitoring, the G2 series stands out as an industry leader, delivering powerful and pristine audio that resonates with both artists and audiences alike.
Top Page Image Contents