JBL Professional G2 Troubleshooting, DJ System with Passive Subwoofers, Symptom, Likely Cause

DJ System with Passive Subwoofers

This system combines a pair of EON10 G2 powered speakers with externally powered subwoofers for extra power at very low frequencies.

* Recommended crossover frequency = 80-150 Hz. (season to taste)

INPUT 1 INPUT 1

DJ Mixer

Output - Left

Output - Right

High Pass Output	High Pass Output
Left		Right

	dbx® DriveRack™ PA*
Low Pass Output - Left	Low Pass Output - Right

Amplifier

Troubleshooting

Symptom	Likely Cause	What to do
No sound	Speaker not connected to active	Verify that speaker is connected and
	AC power.	that the circuit is on.
	Power not switched on.	Switch on power and verify that power
		LED is on.
No sound, speaker is	Speaker power cable is faulty or	Re-seat the power cable at both ends.
connected to working	improperly connected.	Substitute a known-good power cable
AC power but won’t come on.
	Blown fuse.	There are no user-serviceable fuses in
		the EON10 G2. Take your speaker to a
		competent servicer.

13