JBM electronic C-130 Step 3: Access JBM Webserver , Step 4: Log into the Graphical Administration Utility (GAU)

1 19

Page -8-

• METHOD 1 should display an IP of 192.168.0.2

• METHOD 2 should display an IP of 192.168.1.2

Step 3: Access JBM Webserver

• Open a web browser and enter the following in the address bar:

METHOD 1: http://192.168.0.1:10000/

METHOD 2: http://192.168.1.1:10000/

Step 4: Log into the Graphical Administration Utility (GAU)

JBMgateway Login Instructions

• User Name enter: jbmadmin ( lowercase letters)

• For Password enter: six digit serial number of unit (lowercase letters)

Upon successfully logging in you will be rewarded with the following screen:

• At this point, you are connected to the Gateway. You can now configure

the unit to meet your needs.

Contents

Main Table of Contents Quick Start Guide Unpacking Instructions Preparation Accessing the Graphical Management Interface Step 1: Connect PC to JBM Gateway Step 2: Setup PC IP Address Page Page Step 3: Access JBM Webserver Step 4: Log into the Graphical Administration Utility (GAU) Cellular Card Configuration Page Page Step 2: Set the Userid, password and APN Step 3: Save and Apply the Configuration Verify Cellular Connectivity Cellular Connectivity Troubleshooting Cellular Reception Verifying IP Connectivity Minimal Reception Authentication Issues JBM Technical Support Page -17- Copyright 2007 JBM Electronics, Inc. SPECIFCATIONS Software Licensing Terms and Conditions FCC Compliance Statement Information To The User Warranty Extended Warranty Program