Jeep 2WD specifications Ordering Notes, JEEP TJ WRANGLER STAGE I 4WD, 40JEEP, Complete Kit

WCPG_2006_PROCOMP 3/24/06 7:05 PM Page 40

40JEEP

4WD/2WD

JEEP TJ WRANGLER STAGE I 4WD

				Complete Kit	Kit Breakdown (included in complete kit)
		Front / Rear	Recommended	Complete Kit	Front / Rear	Front	Rear
Year	Application	Ride Height (2) Tire Size		ES Series or MX6	Kit	Coils	Coils
97-06	TJ Wrangler / Unlimited	1.5" / 1.5"	31"x10.50"	K3054 (3,6)	55415	Spacer	Spacer
				K3054MX (3,6)	55415	Spacer	Spacer
97-06	TJ Wrangler / Unlimited	2.0" / 2.0"	32"x11.50"	K3055 (3,6)	———	55297	55298
				K3055MX (3,6)	———	55297	55298
03-06	TJ Wrangler / Rubicon	4.0" / 4.0"	33"x12.50"	K3076B (3,5)	55695B	55497	55498
	w/hard top			K3077BMX (3,5)	55695B	55497	55498
	w/soft top			K3078BMX (3,5)	55695B	55497	55498
04-06	Wrangler Unlimited/	4.0" / 4.0"	33"x12.50"	K3084B (3,5)	55695B	55497	55404
	Rubicon			K3084BMX (3,5)	55695B	55497	55404
97-02	TJ Wrangler	4.0" / 4.0"	33"x12.50"	K3056B (3,5)	55495B	55497	55498
				K3056BMX (3,5)	55495B	55497	55498
JEEP TJ WRANGLER STAGE II 4WD
97-02	TJ Wrangler	4.0" / 4.0"	33"x12.50"	K3057B (3,5)	55499B (1)	55497	55498
				K3057BMX (3,5)	55499B (1)	55497	55498

Important

Ordering Notes

•Rear pinion adjustment cams P/N 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.

•Removal of front skid plate on vehicles with automatic transmissions is required for driveshaft clearance when transfer case lowering hardware is used.

•Coil spacer P/N 55496 can be used to increase front ride height by 1" when additional accessories ( winch, winch bumper, trail equipment) are added.

•P/N 90-6048B contains 16 bushings and 8 bushing sleeves.

1.Box kit P/N 55499B, adds Pro Comp's exclusive cross link braced front track bar drop and a drop pitman arm. 97-02 models only.

2.All ride height increases are approximate and will vary due to vehicle specifications ( engine size, factory suspension options , trail equipment, etc).

3.Driveline modifications may be required for height increases over 2" due to increased driveline angles.

4.Add G to the end of crawler bumper P/N for gunmetal gray finish.

5.Front and rear lower arms, transfer case lowering hardware, and extended sway bar links included in all 4" box kits.

6.Transfer case lowering hardware kit P/N 55589 (97-02 only) can be used for minor driveline vibration correction.