Amplifier Maintenance, Cleaning, and Protection
Maintenance and Cleaning
All Jeff Rowland Design Group products are designed to provide a lifetime of enjoyment and listening pleasure. The chassis is sealed to prevent dust from entering and the interior of the chassis should not need cleaning during the lifetime of the product. All internal circuitr y is
The Model 302 Stereo Power Amplifier is uniquely constructed from a number of precision machined aluminum subassemblies. The front panel of the unit is machined in a unique process that incorporates a diamond tipped cutting tool. This process was refined over many years to produce an artistic and attractive finish.
Because the surface is not finished in the typical fashion of most audio and video equipment, there are a few rules that must be kept in mind when cleaning the equipment.
!Please allow the front panel to cure for 6 months before attempting to clean it. This will prevent small scratches from marring the surface before the surface coating has had a chance to harden completely.
!The top cover, sides, and bottom cover can all be cleaned with a soft cotton cloth (such as an optical lens cleaning cloth or fine furniture polishing rag) dampened with plain water. Water should be applied directly to the cloth and not the chassis. If a mark has been left on the chassis, do not use any type of abrasive or chemical cleaner to remove the mark. A ver y mild plastic or glass cleaner that does not contain ammonia should be tried only as a last resort.
!Please contact the factory before trying any type of cleanser on the chassis other than water to clean the unit.
!The front panel of the unit should never be cleaned with anything other than a very soft cotton cloth and plain water or fine
If you have any questions about the care or cleaning of your Model 302 amplifier, please contact your dealer or the Jeff Rowland Design Group factory before attempting to clean the chassis. The use of a cleanser or abrasive to clean the chassis that has not been approved by the factory will almost certainly damage the finish and will not be covered under warranty.
Protection Systems
The Model 302 Stereo Power Amplifier is equipped with active circuitry and thermal circuit breakers for protection against excessive AC mains voltage. However, since no protection circuitry or system can completely protect a product from every electrical hazard, certain precautions should be observed. In the event of severe voltage hazards such as lightning or when the amplifier will not be used for extended periods of time, the amplifier should be unplugged from the AC mains to avoid potential damage to the internal circuitry. All other audio/video system components should also be disconnected from AC mains power as hazardous voltages can travel throughout an interconnected system.
11