Ducting Information
(Model CVE407 only)
•6" diameter round or 3 1/4" x 10" rectangular ducting should be used. Note: 5" diameter round ducting may be used for venting straight out the back of the cooktop and directly through the wall for 10'or less.
•No more than three 90°elbows should be used. Distancebetween elbows should be at least 18".
•Recommended
•There should be a minimum clearance of 6"for cooktop installed neara side wall.
If there is not an obvious improper installation, there may be a concealed problem such as a pinched joint, obstruction in the pipe, etc. Installation is the responsibility of the installerandquestions should beaddressedfirst bythe installer. The installershould very carefully check the ducting installation instructions.
11