Interior Designs 6
444444444444444444444444444444444444444444444444444
Shelves
Fresh Food Compartment and Door
Elevator’” Shelf
The fresh food compartment also may be equipped with adjustable,
The Elevator’” shelf is equipped with a
To adjust the Elevator’” shelf: Pull out the knob on the crank handle. Rotate the crank clockwise to raise the shelf, and counterclockwise to lower the height of the shelf.
To remove: To remove the ElevatoirM shelf for occasional cleaning, completely unload the shelf and pull the shelf for- ward. When the shelf stops, press up on the tabs located underneath its outside edges, then continue pulling for- ward, clear of the frame.
To replace: Align the shelf to the frame and push it all the way back. It is not necessary to depress the tabs for rein- stallation.
In ordinary use, the Elevator’” shelf frame assembly does NOT require removal. Though unlikely, and not recom- mended, the correct removal procedure is as follows:
lUnload the shelf completely.
lSlide the shelf forward about two inches and manually move the two rear latches toward the shelf center.
l While supporting the entire shelf and frame from underneath, lift slightly and rotate the assembly approximately 30” to allow the rear mechanism to clear the vertical rear side rails.
l The entire assembly can then be moved forward and clear of the refrigerator compartment.
lTo reinstall, reverse the removal procedure. Be sure the shelf is in a level position. When the sliding shelf is pushed to the rear, it will reposition the rear latches to their correct operating position.
In some models, these shelves have the slide out feature. To slide out, simply grasp the front of the shelf and pull. Gently push in to return the shelf to the original position.
These shelves can be moved for varying food storage . needs.
To remove a shelf:
l completely unload the shelf
lslightly lift up the rear of the shelf
l pull the shelf straight out
To lock a shelf into another position:
ltilt up the front edge of the shelf
linsert the hooks into the desired frame openings
llet the shelf settle into place
lbe sure the shelf is securely locked at the rear before reloading
VERTICAL RAILS REAR GUIDES
, LATCHES \
ImI FRAME | ASSEMBLY’I~I | ’ PUuC | UU 1 SHELF |
(Style may vary)
