Specialized Storage Areas, Automatic Humidity Control

Specialized Storage Areas

Your refrigerator has an Adjusti-Temp’” meat storage drawer. This drawer is designed to provide a short term storage area for fresh meats, cheeses and luncheon meats.

The Adjusti-Temp’” Drawer is the top drawer in the fresh food compartment. The temperature control for this drawer is located on the shelf front above the draw- er. Slide the control left or right to achieve the desired internal temperature of the drawer. The “cool” setting provides a temperature similar to that of the surrounding fresh food compartment. The “cold” setting provides a lower temperature within the drawer which is recom- mended when storing fresh meat, poultry or fish.

To remove this drawer for cleaning:

lpull the drawer out until it stops

llift the drawer up slightly and pull it out To replace the drawer:

* reverse above procedure

For best results, keep this drawer closed tightly.

l **************

The Crispers are ideal for storage of fruit and vegetables. They are equipped with an automatic humidity control sys- tem.

Automatic Humidity Control

A fabric-like material* covers small air vents in the shelf insert above the crispers.

This material controls the flow of moisture out of the crisper to provide the optimum environment for your food. If a food spill should occur on the air vent or fabric-like material, wipe with a clean, damp cloth.

l **************

*Maytag Automatic Humidity Control system features a unique, patent- ed material called Shape Memory Polymer (SMP) that when laminated

to fabric, becomes DIAPLEX. DIAPLEX is manufactured by Mitsubishi. DiAPLEi

To remove a crisper drawer for cleaning:

l pull out the crisper until it stops

ltilt the drawer front up and pull it out To replace a crisper drawer:

lalign the drawer in the tracks

llift the drawer front and slide in

I For best results, keep the crispers tightly closed.

The sealed cover of the top drawer serves as the lower refrigerator shelf.

To remove the cover:

llift the front edge of the shelf

lpull the shelf straight out

To replace the cover:

lset the rear bars on the support

lpush the shelf back until the front edge can be lowered into place