USING YOUR COOKTOP
SURFACE CONTROLS
3
Use to turn on the surface elements. An
infinite choice of heat settings is
available from Lo to Hi. The knobs can
be set on or between any of the set-
tings.

SETTING THE

CONTROLS
1. Place pan on surface element.
2. Push in and turn the knob in either
direction to the desired heat setting.
3. After cooking, turn knob to OFF.
Remove pan.

SURFACE CONTROL KNOBS

Refer to illustrations for knob placement.
Knob Location Grilling Operation Cartridge Operation
A Exhaust Fan & Element (left) Left Rear Element
B Exhaust Fan Left Front Element
C Exhaust Fan Right Rear Element
D Exhaust Fan & Element (right) Right Front Element
E ---------- Far Right Rear Element
F ---------- Far Right Front Element
The function of the left and center bays of the JED8345 is the same as described in
the above chart.
There is no grilling on the right side of the JED8345 or JED8130.
Knobs B & C control the fan only and are not required for grilling.
AC
BD
AC
BDE
F
MODEL JED8130 & JED8230 MODEL JED8345
8111P487-60 6/8/06, 2:13 PM4