Installing Cabinetry Over Your Jenn-air Grill

Minimum horizontal clearance between the edge of the appliance and combustible construction extending from the cooking surface to 18￿ (45.7 cm) above the cooking surface is:

15/16￿

(2.38 cm)

at rear

6￿

(15.24 cm)

at left side

6￿

(15.24 cm)

at right side

NOTE: This is not the recommended clearance, but minimum allowable clearance.

FIGURE 4

A = 30￿ (76.2 cm) minimum vertical clearance between cooking surface and construction above the appliance. the underside of combustible material or metal cabinets above the cooking top must be protected with flame retardant millboard not less than 1/4￿ (0.635 cm) thick.

B = 13￿ (33.02 cm) maximum depth of cabinets installed above cooking top.

Lines indicate range hood construction

1/4￿ THICK FLAME RETARDANT MILLBOARD

FIGURE 5

Avoid use of cabinets above cooktop for storage space to eliminate associated potential hazards such as reaching over open flames.

*To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.

Preparation Of Countertop

The countertop cutout must be prepared according to the illustrations on pages 1 and 2 of these instructions.

CAUTION: Cutout dimensions are critical. Dimensions must be measured and cut accurately to within + 1/16￿ (.159 cm) to ensure proper fit.

Important Preparation Suggestions

1.Chamfer all exposed edges of decorative laminate to prevent damage from chipping.

2.Radius corners of cutout and file to insure smooth edges and prevent corner cracking.

3.Rough edges, inside corners which have not been rounded and forced fits can contribute to cracking of the countertop laminate.

4.Countertop must be supported within 3￿ (7.62 cm) of cutout.

Installation Of Appliance

The installation of this appliance must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-Latest Edition, or, in Canada, CAN/CGA-B149 Installation Code, Latest Edition.

This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA No. 70-Latest Edition, or, in Canada, current CSA Standard C22.1 Canadian Electrical Code, Part 1.

All supply piping, except as noted, should use common National Pipe Thread (N.P.T.). For all pipe connections use an approved pipe joint compound resistant to the action of LP gas.

CAUTION: Warranty is void on Jenn-Air equipment installed other than as recommended by manufacturer.

This appliance is designed for use with the appliance gas pressure regulator supplied with this appliance. It must be installed in the gasway ahead of the gas manifold entrance. It is preset for use with natural gas and must be converted for use with LP gas.

This appliance is designed to operate at a pressure of 5 inches of water column on natural gas or, if converted for use with LP gas (propane or butane), 10 inches water column. Make sure this appliance is supplied with and adjusted for the type of gas for which it is designed.

3

Page 2 Page 4
Page 3
Image 3
Jenn-Air JGCP430ADP Installing Cabinetry Over Your Jenn-air Grill, Preparation Of Countertop, Installation Of Appliance
Page 2 Page 4

JGCP430ADP, JGCP636ADP, JGCP648ADP specifications

The Jenn-Air JGCP648ADP is a premium gas cooktop designed for culinary enthusiasts seeking both style and high-level performance. With its sleek, modern design, this cooktop seamlessly integrates into any contemporary kitchen, making it as much a focal point as it is a functional tool.

One of the standout features of the JGCP648ADP is its powerful gas burners, which deliver impressive heating capabilities. It boasts six burners, including a high-output 20,000 BTU burner, perfect for rapid boiling or searing meats, along with a simmer burner that offers precise temperature control for delicate sauces and chocolates. This versatility allows for various cooking techniques, from frying to slow cooking, ensuring that chefs can execute their culinary vision effortlessly.

The cooktop features the innovative Jenn-Air dual-stacked burners, which provide the flexibility of high-heat cooking combined with low, even cooking for delicate dishes. The design of these burners promotes even heat distribution, minimizing cold spots and promoting uniform cooking results. Additionally, the burner's functionality is enhanced by the easy-to-use control knobs positioned at the front for quick access.

Another notable characteristic of the JGCP648ADP is its seamless stainless-steel finish, which not only adds elegance but also enhances durability. The stainless-steel surface is resistant to stains and scratches, making it easier to maintain its appearance over time. The cooktop is also equipped with dishwasher-safe grates, which can be easily cleaned, further contributing to convenience in the kitchen.

Safety is a priority with the Jenn-Air cooktop, which includes features such as flame-sensing technology that automatically reignites the burners in the event the flame goes out. This ensures continuous cooking without the risk of gas leaks. Additionally, the cooktop features an automatic electronic ignition system, providing a reliable and hassle-free startup experience.

Overall, the Jenn-Air JGCP648ADP combines sophisticated design, advanced burner technology, and user-friendly features to create an exceptional cooking experience. Whether preparing a gourmet meal or a weeknight dinner, this cooktop delivers performance and style that stands out in any kitchen environment. As a blend of power, precision, and luxury, the Jenn-Air JGCP648ADP is an excellent choice for those looking to elevate their cooking experience.
Top Page Image Contents