Gas Supply Connection, Pressure Testing

Gas Supply Connection

A TRAINED SERVICEMAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions below.

Apply a non-corrosive leak detection fluid to all joints and fittings in the gas connection between the supply line shut-off valve and the range. Include gas fittings and joints in the range if connections were disturbed during installation. Check for leaks! Bubbles appearing around fittings and connections will indicate a leak. If a leak appears, turn off supply line gas shut-off valve, tighten connections, turn on the supply line gas shut-off valve, and retest for leaks.

CAUTION: NEVER CHECK FOR LEAKS WITH A FLAME.

WHEN LEAK CHECK IS COMPLETE, WIPE OFF ALL RESIDUE.

If the alternative piping method shown in figure 8 is selected for the installation, no ground joint union is required. (The flexible appliance connector illustrated provides the union joints necessary for servicing.) When a dividing wall is present and a flexible connector is used it is recommended for convenience, in both installation and service, the flexible connector, itself, pass through the dividing wall. Any flexible connector used with this appliance must satisfy all requirements stated in the text following figure 8.

	MANIFOLD PIPE
	APPLIANCE PRESSURE
	REGULATOR, SUPPLIED
	(OBSERVE DIRECTION
	OF GAS FLOW ARROW)
	FLARE	1/2 NPT
	UNION	1/2 NPT
	ADAPTOR	PIPE
	FLEXIBLE	NIPPLE
	FLEXIBLE
	APPLIANCE
	CONNECTOR
	(5 FT. MAX)	GAS
		GAS
	FLARE	SHUT-OFF
	FLARE	VALVE
	UNION	VALVE
	UNION
	ADAPTOR
	GAS	1/2 NPT
	SHUT-OFF	PIPE
	VALVE
	1/2 NPT
	PIPE
		FIGURE 8

Unless prohibited by local codes or ordinances, a new A.G.A. - Certified, flexible metal appliance connector may be used to connect this appliance to its gas supply. The connector must have an internal diameter not less than nominal 1/2 NPT pipe and be no more than 5 feet in length. A 1/2 NPT x 1/2 flare union adapter is required at each end of the flexible connector. If a flexible connector is used assure that both the appliance pressure regulator and manual shut-off valve are joined solidly to other permanent hard piping (either gas supply or the appliance manifold) so as to be physically stationary.

CAUTION: Do not attempt to attach the flexible connector directly to an external pipe thread. Connection requires flare union adapters.

Pressure Testing

The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG (3.5 kPa).

This appliance, as well as its individual shut-off valve, must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of 1/2 PSIG (3.5 kPa).

When checking appliance regulator function, make certain pressure of natural gas supply is between 6 and 14 inches of water column or, if converted for LP gas, between 11 and 14 inches.

Electrical Wiring Information

This appliance is equipped with a grounded type power cord. A grounded outlet must be provided.

The power cord extends 45 outside the unit housing. The outlet should be located inside the cutout width and below the lowest most projection of the unit housing.

WARNING

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS EQUIPPED WITH A THREE PRONG GROUNDING PLUG FOR YOUR PROTECTION AGAINST SHOCK HAZARD AND SHOULD BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED RECEPTACLE. DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THIS PLUG.

WARNING

THIS APPLIANCE MUST BE DISCONNECTED FROM ITS ELECTRICAL SUPPLY AT THE WALL RECEP- TACLE BEFORE SERVICING THE APPLIANCE.

JGCP430ADP, JGCP636ADP, JGCP648ADP specifications

The Jenn-Air JGCP648ADP is a premium gas cooktop designed for culinary enthusiasts seeking both style and high-level performance. With its sleek, modern design, this cooktop seamlessly integrates into any contemporary kitchen, making it as much a focal point as it is a functional tool.

One of the standout features of the JGCP648ADP is its powerful gas burners, which deliver impressive heating capabilities. It boasts six burners, including a high-output 20,000 BTU burner, perfect for rapid boiling or searing meats, along with a simmer burner that offers precise temperature control for delicate sauces and chocolates. This versatility allows for various cooking techniques, from frying to slow cooking, ensuring that chefs can execute their culinary vision effortlessly.

The cooktop features the innovative Jenn-Air dual-stacked burners, which provide the flexibility of high-heat cooking combined with low, even cooking for delicate dishes. The design of these burners promotes even heat distribution, minimizing cold spots and promoting uniform cooking results. Additionally, the burner's functionality is enhanced by the easy-to-use control knobs positioned at the front for quick access.

Another notable characteristic of the JGCP648ADP is its seamless stainless-steel finish, which not only adds elegance but also enhances durability. The stainless-steel surface is resistant to stains and scratches, making it easier to maintain its appearance over time. The cooktop is also equipped with dishwasher-safe grates, which can be easily cleaned, further contributing to convenience in the kitchen.

Safety is a priority with the Jenn-Air cooktop, which includes features such as flame-sensing technology that automatically reignites the burners in the event the flame goes out. This ensures continuous cooking without the risk of gas leaks. Additionally, the cooktop features an automatic electronic ignition system, providing a reliable and hassle-free startup experience.

Overall, the Jenn-Air JGCP648ADP combines sophisticated design, advanced burner technology, and user-friendly features to create an exceptional cooking experience. Whether preparing a gourmet meal or a weeknight dinner, this cooktop delivers performance and style that stands out in any kitchen environment. As a blend of power, precision, and luxury, the Jenn-Air JGCP648ADP is an excellent choice for those looking to elevate their cooking experience.

Jenn-Air JGCP636ADP Gas Supply Connection, Pressure Testing, Electrical Wiring Information

Models: JGCP430ADP JGCP636ADP JGCP648ADP