Manuals / Jenn-Air / Kitchen Appliance / Ventilation Hood

Jenn-Air JGCP648ADP, JGCP430ADP, JGCP636ADP dimensions Installation Of Appliance

Models: JGCP430ADP JGCP636ADP JGCP648ADP

1 36
Download 36 pages 31.85 Kb
Page 4
Image 4

Installation Of Appliance

This appliance was adjusted at the factory for use with natural gas. If, at any time, this appliance is to be used with a different type of gas, all of the conversion adjustments must be made by a qualified service technician before attempting to operate the cooktop on that gas. Natural gas should be supplied to the appliance pressure regulator at a line pressure between 6 and 14 inches of water column or, if converted for LP gas, between 11 and 14 inches.

WARNING

If the line pressure supplying the appliance pressure regulator exceeds 14￿ W.C. (any gas), an external regulator must be installed in the gas line ahead of the appliance regulator to reduce the pressure to no more than 14￿ W.C. Failure to do this can result in malfunction and damage to the appliance.

Insure this appliance is adjusted for the type of gas supplied to it and that the gas supply pressure to the appliance regulator is within the proper pressure range.

Do not remove protective cap from pipe stub at manifold entrance until ready to join gas supply piping to appliance.

The Countertop Cutout and Cabinet Front Cutout should be prepared according to the illustrations on pages 1 and 2.

Install the Lower Control Panel in the bottom of the Cabinet Cutout as shown using screws from Hardware pack (Figure 6).

FIGURE 6

Position unit in the Countertop Cutout. Main Control Panel should overlap top of Lower Control Panel as shown (Figure 7).

FIGURE 7

NOTE: For some cabinet styles, it may be necessary to reinforce the front of the cabinet by attaching a brace from front to rear inside the cabinet under the Burner Box.

CAUTION: Warranty is void on JENN-AIR equipment installed other than as recommended by manufacturer.

Join the appliance pressure regulator supplied with this appliance to the entrance threads of the Gas Manifold. The appliance regulator is marked with a directional arrow indicating correct direction of gas flow. Ensure the appliance regulator is installed with the arrow pointing toward the gas manifold entrance. Tighten the appliance regulator to 20 to 30 ft-lbs of torque.

IMPORTANT

Never tighten to more than 35 ft-lbs of torque. Always use an approved pipe joint compound resistant to the action of LP gas.

Install the appliance in its counter cutout.

Make the gas connection to the inlet of the appliance pressure regulator with 1/2￿ male pipe threads.

Install a manual shut-off valve in an accessible location in the gas line ahead of the appliance pressure regulator and external to this appliance for the purpose of turning on or shutting off gas to the appliance.

Make additional pipe connections as necessary ahead of the shut-off valve to the gas supply source. Assure all pipe joint connections are gas tight.

4

Page 3 Page 5
Page 4
Image 4
Jenn-Air JGCP648ADP, JGCP430ADP, JGCP636ADP dimensions Installation Of Appliance
Page 3 Page 5

JGCP430ADP, JGCP636ADP, JGCP648ADP specifications

The Jenn-Air JGCP648ADP is a premium gas cooktop designed for culinary enthusiasts seeking both style and high-level performance. With its sleek, modern design, this cooktop seamlessly integrates into any contemporary kitchen, making it as much a focal point as it is a functional tool.

One of the standout features of the JGCP648ADP is its powerful gas burners, which deliver impressive heating capabilities. It boasts six burners, including a high-output 20,000 BTU burner, perfect for rapid boiling or searing meats, along with a simmer burner that offers precise temperature control for delicate sauces and chocolates. This versatility allows for various cooking techniques, from frying to slow cooking, ensuring that chefs can execute their culinary vision effortlessly.

The cooktop features the innovative Jenn-Air dual-stacked burners, which provide the flexibility of high-heat cooking combined with low, even cooking for delicate dishes. The design of these burners promotes even heat distribution, minimizing cold spots and promoting uniform cooking results. Additionally, the burner's functionality is enhanced by the easy-to-use control knobs positioned at the front for quick access.

Another notable characteristic of the JGCP648ADP is its seamless stainless-steel finish, which not only adds elegance but also enhances durability. The stainless-steel surface is resistant to stains and scratches, making it easier to maintain its appearance over time. The cooktop is also equipped with dishwasher-safe grates, which can be easily cleaned, further contributing to convenience in the kitchen.

Safety is a priority with the Jenn-Air cooktop, which includes features such as flame-sensing technology that automatically reignites the burners in the event the flame goes out. This ensures continuous cooking without the risk of gas leaks. Additionally, the cooktop features an automatic electronic ignition system, providing a reliable and hassle-free startup experience.

Overall, the Jenn-Air JGCP648ADP combines sophisticated design, advanced burner technology, and user-friendly features to create an exceptional cooking experience. Whether preparing a gourmet meal or a weeknight dinner, this cooktop delivers performance and style that stands out in any kitchen environment. As a blend of power, precision, and luxury, the Jenn-Air JGCP648ADP is an excellent choice for those looking to elevate their cooking experience.