3 of 4 |
30" combination microwave/wall ovens
JMW3430W, JMW2430W, JMW2330W – 293⁄4" x 431⁄8" x 263⁄4"
OPENING/CLEARANCE DIMENSIONS
A |
D |
C |
B |
E |
e |
F |
FRONT VIEW
G |
Side VIEW
|
|
| JMW3430W | |
|
|
| JMW2430W | |
MODEL # |
| JMW2330W | ||
|
|
|
|
|
|
|
| in | cm |
|
|
|
|
|
A | Width of cabinet (min.) |
| 30 | 76.2 |
|
|
|
|
|
B | Width of cutout |
| 281⁄2 | 72.4 |
C | Height of cutout |
| 411⁄4 | 104.8 |
D | Top of cutout to bottom |
| 2 | 5.1 |
of upper cabinet door (min.) |
| |||
|
|
|
| |
|
|
|
|
|
E | Bottom of cutout to top |
| 11⁄2 | 3.8 |
of lower cabinet door (min.) |
| |||
|
|
|
| |
|
|
|
|
|
F | Bottom of cutout to floor |
| 45⁄8- | 11.7- |
| 191⁄4 | 48.9 | ||
|
|
| ||
G | Depth of cutout (min.) |
| 24 | 61.0 |
|
|
|
|
|
e | Recommended junction box location |
|
| |
|
|
|
|
|
ELECTRICAL REQUIREMENTS
240 volt,
The length of conduit provided is for serviceability. Do not cut the conduit. The junction box should be located 3" (7.6 cm) maximum below the support surface. Drill a 11⁄4" (3.4 cm) minimum diameter hole in the left rear corner of the support surface for access to the junction box.
Power Supply Location
Back VIEW
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing | JRC120003A 07/2012 |
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary. |