Oporat,o°
Setting Controls
Your new refrigerator has two controls.
One | for regulating the temperature | in | .....................0_ | I_ | E I | |
the | refrigerator compartment and | one | , | i |
| |
for the freezer compartment. Both con- |
|
|
|
| ||
trols are located at the upper rear of the |
|
|
|
| ||
refrigerator compartment, just below the |
|
|
|
| ||
light | shield. |
| _ | 5 4 3 21 |
| |
|
|
| 'TURN freez,, con,rol to ng,t HIGHER numbe, | |||
To start your refrigerator, set the refrig- |
| I |
|
| ||
erator control on "F" and set the freez- |
|
|
|
| ||
er control on "4". |
|
|
|
|
| |
IMPORTANT: In a day or so, you may decide that one or both compartments should be colder or warmer. DO NOT change either control more than one letter or one number at a time. Allow 24 hours for temperature to stabilize before adjusting the setting again. This does not apply when you first start your refrigerator.
To turn off your refrigerator, set the refrigerator control on off.
Warm Cabinet Surfaces
At times, the front surfaces of your refrigerator cabinet may be warm to the touch. This is a normal function of your refrigerator. This feature prevents moisture from condensing on the outside of your refrigerator during humid weather. This condition may be noticea- ble when you first start your refrigerator, during hot weather, and during excessive or lengthy door openings.
Energy Tips
For efficient energy use:
1.Be sure refrigerator is level and ventilation around front grille is not blocked.
2. Check door seals occasionally for leakage. Check at various places, top, bottom, and sides.
3.Check the temperature; avoid unnecessary cold settings.
4. Keep freezer full to near capacity, less cold air is lost during door openings.
5.Let hot dishes cool before putting into refrigerator or freezer.
6.Cover liquids; if uncovered, the unit must work longer.
7.Clean refrigerator condenser coils at least twice a year.
