[ Setting Controls]
/
Your new refrigerator has two controls. One for r;,".",_:'_,_'.",_.';,._%_ T
regulating the temperature in the fresh food
located atthe upper rearofthe refrigerator compart- | / | _, | |
ment, just below the light shield. |
|
| Fig.A |
FOR MODELS JRS2O7, JRSD2250 & JRSD2460:
Tostartyourrefrgerator,•settherefrgeratorcontrolon,i F. andsetthefreezercontrolo n "4" {See fig. A).
FOR MODELS JRS229, JRSD209, JRSDE229, JRSDE249, JRSD279:
on "6" and set the freezer control on "D" (See Fig. F,.,,
B).
To start your refrigerator, setthe refrigerator | control | _ | i) |
Let the refrigerator run at least two hours | before | Fig. | |
loading it with food. |
|
|
|
IMPORTANT: In a day or so, you my decide that one or both compartments should be colder or warmer. DO NOT change either control more than one letter or one number at a time. Allow 24 hours for temperature to stabilize before adjusting the setting again. This does not apply when you first start your refrigerator.
To turn off your refrigerator, set the refrigerator control on OFF.
[ Warm Cabinet Surfaces ]
At times, the front surfaces of your refrigerator cabinet may be warm to the touch. This is a normal function of you r refrigerator. This feature prevents moisture from condensing on the outside of your refrigerator during humid weather. This condition may be noticeable when you first start your refrigerator, during hot weather, and during excessive or lengthy door openings.
[EneTir,.s]
For efficient energy use:
1. Be sure the refrigerator is level and ventilation around the front grille is not blocked.
2. Check door seals occasionally for leakage. Check at various places: top, bottom, and sides.
3. Check the temperature; avoid unnecessary cold settings.
4.Keep the freezer near full capacity; less cold air is lost during door openings.
5.Let hot dishes cool before putting into refrigerator or freezer.
6.Cover liquids; if uncovered, the unit must work longer.
7. Clean refrigerator condenser coils at least twice a year. 5
