Jenn-Air JW3000 ,//

TheLint Filtering system doesnotrequirecleaning. Abuilt-inprotectorautomaticallyshutsoffthewashermotorincaseof

Washandrinsewaterisfilteredand re-filteredcontinuouslytotraplintan overload_Thiscan occurif:

shed bymost fabrics duringagitation cycle before it can be re-

depositedonthe washload. The engineered hole design on the wash • Too heavy a load is being washed.

basketin conjunction with water flow produced by the agitator traps

lintaway fromthe clothesbetween the inner washbasket and outer • Too many appliances are plugged into the line operating

tub. Lint is automatically flushed from thewasher during spincycle,your washer.

• A low voltage condition existsonthe line.

Yourwasherisdesigned to handleoutof balanceloads without The overloadprotectorpermits thewasherto start againwhenthe

shuttingdownorinterruptingthewashingcycle.Thecyclewillalways motorhascooledto a safeoperatingtemperature.

becompleted,butclothesinthiscyclemay containexcessivemois-

ture. Redistributethe clothes inthe washerand activatethe washer Ifthemotor stopsrepeatedly,call yourJenn-Air ServiceContractor.

byselecting SPIN ONLY.Touch START/PAUSE Pad for extra spin.

Ifforany reasonyou open thewasher lidwhenthewasher is in a cyclesorliquiddetergentwith ULTRA WASH cycleThedispenser

SPINperiod,theoperationwillimmediatelystop.IF YOUR WASHER should be cleaned afteruse ofliquid detergent.

DOES NOT STOP, CALL YOURJENN-AIR SERVICE CONTRAC-

TOR IMMEDIATELY. To clean the dispenser, hold thedispenser with bottom side up and

pushinwardon the tabs. You are then ableto clean bothparts using

warm water and a brush if necessary.

LIQUID DISPENSER

_/,_I_NERCHAMeER

Whenthe lidis closed theoperation willautomatically be resumed. _,-----OUTER CHAMBER

,//

To reassemble, hold both pieces in anupright position. Insert the

inner chamber into the outer chamber using ribs to position parts.

Rotateuntil a stop is felt. Pushparts together firmly to engage locking

tabs.

Toturnlight OnorOff: The light switch is located under the control

panel on the left side. Push on the switch to turn the light on

and/or off.