INSTALLATION5

MOUNTING THE RANGEHOOD

ELECTRICAL

WARNING

All Electrical work must by performed by qualified electrician or person with similar technical know how and background.

For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance.

Follow National electrical codes or prevailing local codes and ordinances.

Electrical Supply:

This appliance requires a 120V 60Hz electrical supply, connected to an individual, properly grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire w/ ground. Please also refer Electrical Diagram labeled on product.

Cable Lock:

A cable locking connector (not supplied) might also required by local codes. Check with local requirements and codes, purchase and install appropriate connector if necessary.

Cable Lock

Page 7
Image 7
Jenn-Air JXT9130CDP, JXT9136CDP specifications INSTALLATION5, Mounting the Rangehood Electrical, Cable Lock